1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Tempe Porcelain-Fused-to-Metal Crown

Tempe practices running a busy restorative schedule need a PFM crown workflow that does not introduce delays or guesswork at the margin appointment. Dani Dental fabricates porcelain-fused-to-metal crowns using a full digital intake path: intraoral scans accepted from all major scanner formats, or conventional impressions poured in-house on arrival. Every case is assigned to a named bench technician before fabrication begins, and that technician holds the case through porcelain layering, characterization, and final inspection. No handoffs mid-case.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Tempe practices running a busy restorative schedule need a PFM crown workflow that does not introduce delays or guesswork at the margin appointment. Dani Dental fabricates porcelain-fused-to-metal crowns using a full digital intake path: intraoral scans accepted from all major scanner formats, or conventional impressions poured in-house on arrival. Every case is assigned to a named bench technician before fabrication begins, and that technician holds the case through porcelain layering, characterization, and final inspection. No handoffs mid-case.

THE DETAIL

How we build it.

Large national-network labs ship PFM crowns from centralized facilities that may be 1,200 miles from your Tempe operatory. When a margin question comes up at seating, the turnaround on a remake runs through a ticket queue, not a technician you can call. Dani Dental ships every case with the fabricating technician's direct line. If the contact is wrong or the shade needs a chairside adjustment note, you call the person who built it. That single-point accountability is not a feature national-network labs offer at standard pricing tiers. Regional labs in the Phoenix metro often position on price alone. Dani's pricing for PFM crowns is posted in the Doctor Kit and does not require a sales call to access. What price-only labs rarely publish is remake rate. A crown remade once costs the practice more in chair time than the delta between a $79 and a $129 unit price. The less-than-2.5% remake target is the number that matters for Tempe offices running a tight restorative schedule. Dani Dental has been fabricating on the bench in Arizona since 1993, three decades before digital scanners became standard issue. The digital workflow layered onto that foundation means the lab uses current milling and ceramic technology without discarding the hand-layering craft that closes the difference between a passing shade match and a precise one. For Tempe practices sending both high-volume bread-and-butter PFM cases and complex aesthetic cases, that breadth matters.

GETTING CASES TO US

Logistics, to the bench.

Tempe practices running a busy restorative schedule need a PFM crown workflow that does not introduce delays or guesswork at the margin appointment. Dani Dental fabricates porcelain-fused-to-metal crowns using a full digital intake path: intraoral scans accepted from all major scanner formats, or conventional impressions poured in-house on arrival. Every case is assigned to a named bench technician before fabrication begins, and that technician holds the case through porcelain layering, characterization, and final inspection. No handoffs mid-case. For posterior restorations where patients want metal strength without full-metal aesthetics, PFM remains the clinically appropriate choice. Dani's PFM cases use a high-noble or noble alloy substructure selected by shade zone and occlusal load, with feldspathic porcelain layered to your prescribed shade using the Vita Classical or 3D-Master system. Margin accuracy is verified against a refractory die before firing, so seating appointments in Tempe offices average one try-in, not two. Tempe's patient mix skews younger and more aesthetically aware than many East Valley submarkets, partly due to ASU's proximity and the corridor of corporate dental groups along Southern Avenue and Rural Road. That means you are fielding more crown cases where patients ask about all-ceramic alternatives. Your Dani technician can walk through material selection with you directly, and the PFM option is documented alongside ceramic alternatives in the case notes so you have the clinical comparison in writing before the patient conversation.

COMMON QUESTIONS

What practices ask

What alloy options are available for PFM crowns, and how do you select the right one for a given case?
Dani Dental uses high-noble, noble, and predominantly-base alloys depending on occlusal load, patient metal sensitivity notes, and shade zone. Posterior cases with heavy bruxing patterns are flagged for high-noble substructures. If your prescription does not specify, the assigned technician will select based on case notes and contact you before casting if the load profile suggests a deviation from your default preference.
Do you accept digital impressions from iTero, CEREC, or Trios scanners for PFM cases?
Yes. Dani accepts STL files from iTero, 3Shape Trios, Dentsply Sirona CEREC, and most other major intraoral scanner platforms. Files can be uploaded through the case submission portal or emailed directly to your technician. Conventional polyvinyl siloxane or polyether impressions are also accepted and poured in-house within 24 hours of receipt at our Arizona facility.
What is the standard turnaround for a PFM crown case sent from a Tempe practice?
Standard turnaround is 5 business days from case receipt to shipment back to your Tempe address. Rush cases flagged at submission are evaluated for a 3-business-day path depending on current production load. Tempe practices using same-day courier pickup before 2 p.m. have cases logged as received same day; cases arriving after 2 p.m. are logged the following business morning.
How is shade matching handled for PFM crowns, and what shade systems do you work with?
Dani technicians work with Vita Classical and Vita 3D-Master as primary systems. Custom shade tabs, photographs, and contralateral tooth references are all accepted. For complex anterior PFM cases or unusual translucency requests, the fabricating technician can schedule a brief phone shade consult with the prescribing dentist before layering begins, typically within one business day of case receipt.
What is Dani Dental's remake policy if a PFM crown does not seat correctly?
If a PFM crown does not seat due to a lab fabrication error, confirmed by returning the crown with the original impression or scan file, Dani remakes the unit at no charge with priority turnaround. The remake is assigned to the same technician who built the original case. Practices are not billed for shipping on confirmed lab-error remakes within 30 days of original delivery.
Can Dani Dental handle both high-volume PFM output and more complex aesthetic restorations for my Tempe practice?
Yes. Dani's Arizona production handles routine posterior PFM cases on the same bench as complex multi-unit anterior reconstructions. There is no volume tier that routes high-volume accounts to junior technicians. Case complexity is matched to technician experience at the assignment stage, and the named-technician model applies regardless of whether a practice sends two cases a month or twenty.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician