1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Tempe Essix Retainer

Essix retainers fabricated at Dani Dental start with a digital workflow. Tempe practices submitting intraoral scans via iTero, 3Shape, or Medit skip the impression boxing step entirely, moving directly into CAD-assisted model generation and thermoforming. The result is a retainer with consistent 0.030-inch or 0.040-inch Essix ACE material thickness, precise margin adaptation, and no distortion artifacts from poured stone.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Essix retainers fabricated at Dani Dental start with a digital workflow. Tempe practices submitting intraoral scans via iTero, 3Shape, or Medit skip the impression boxing step entirely, moving directly into CAD-assisted model generation and thermoforming. The result is a retainer with consistent 0.030-inch or 0.040-inch Essix ACE material thickness, precise margin adaptation, and no distortion artifacts from poured stone.

THE DETAIL

How we build it.

Most national-network labs route Essix orders through a centralized fulfillment model where no single technician owns the case from start to finish. At Dani Dental, each removable appliance case is assigned to a named technician, and that technician's direct line ships with every case. If a retainer from your Tempe office needs a margin adjustment or a patient reports a fit issue within 30 days, you call one person, not a help queue. Large-volume digital labs optimized for crown-and-bridge throughput often treat Essix retainers as low-priority filler work. We fabricate removables alongside fixed prosthetics on the same daily production schedule, so a retainer case submitted Monday morning does not sit idle while implant crowns move through the queue first. Three-to-five business day turnaround is a stated commitment, not a best-case estimate. Pricing is published and flat. There is no tiered account structure where Tempe practices at lower monthly volume pay a penalty rate. A single-arch Essix retainer costs the same whether you submit one case a month or fifty. Statements itemize by case, not by opaque account fee, so your office manager can reconcile in under ten minutes.

GETTING CASES TO US

Logistics, to the bench.

Essix retainers fabricated at Dani Dental start with a digital workflow. Tempe practices submitting intraoral scans via iTero, 3Shape, or Medit skip the impression boxing step entirely, moving directly into CAD-assisted model generation and thermoforming. The result is a retainer with consistent 0.030-inch or 0.040-inch Essix ACE material thickness, precise margin adaptation, and no distortion artifacts from poured stone. For practices in Tempe that still work from PVS or alginate impressions, the process is the same once models are poured: every case is checked for bubble voids and margin integrity before thermoforming begins. Occlusal clearance and interproximal contact fit are verified at bench before shipping. The retainer ships in a labeled patient case with your practice name, not Dani Dental's, keeping the patient relationship yours. Tempe's dense mix of ASU-adjacent general practices, orthodontic suites near McClintock and Southern, and multi-doctor group offices means high Essix volume is common. Practices running 15 or more retainer cases per month qualify for consolidated weekly pickup routing through our Arizona courier network, reducing per-case shipping cost and simplifying inventory management for your front desk.

COMMON QUESTIONS

What practices ask

What scan or impression formats do you accept for Essix retainer cases from Tempe practices?
We accept STL files from any major intraoral scanner including iTero, 3Shape Trios, and Medit. Physical impressions in PVS, polyether, or alginate are also accepted. Alginate cases should be poured within 60 minutes of impression taking or shipped in a sealed humidity-retaining bag. Digital submissions process faster and eliminate stone-pour variability, so we encourage the scan workflow where your setup allows.
How thick is the Essix material Dani Dental uses?
Standard Essix retainers are fabricated with Essix ACE material at 0.040-inch thickness for upper arches and 0.030-inch for lower arches unless your prescription specifies otherwise. If your practice protocol calls for uniform 0.030 or heavier 0.050 gauge on specific cases, note that in the Rx and the technician will match it exactly. Material lot tracking is maintained per production run.
What is the turnaround time for Essix retainers submitted from Tempe?
Standard turnaround is 3 to 5 business days from the day a complete, usable impression or scan is received. Digital scan submissions that arrive before noon Arizona time typically begin production the same day. Rush 48-hour service is available for an additional fee. Practices enrolled in our Arizona courier routing can expect consolidated weekly delivery on a scheduled day rather than waiting on standard carrier transit.
Does Dani Dental offer branded or unbranded retainer packaging for Tempe practices?
Every Essix retainer ships in a labeled case printed with your practice name, not ours. Packaging is clean and professional with no Dani Dental branding visible to the patient. If your office uses a specific color or has a preferred case style, note it on your account setup form and we will standardize it across all your orders. The patient relationship stays yours.
What happens if a retainer does not fit correctly after delivery?
Call the technician whose direct line is printed on the case label. If the fit issue is attributable to a fabrication error, we remake the retainer at no charge within 30 days of delivery. We ask that you return the original appliance and provide a brief description of the fit discrepancy. If the issue stems from a significant change in patient dentition post-delivery, we will discuss the case and quote a remake separately.
Can Tempe practices set up a recurring monthly Essix order for orthodontic retention cases?
Yes. Practices with predictable monthly Essix volume, typically 10 or more retainer cases per month, can set up a standing account with consolidated billing and scheduled courier pickup. This removes the per-shipment logistics step for your front desk and simplifies month-end reconciliation. Contact us with your average monthly case count and we will configure the account before your first submission.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician