1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Tempe All-on-X Hybrid (Acrylic/Titanium)

Tempe practices running high-volume full-arch implant cases need a lab that can hold tolerances on titanium bar milling while keeping acrylic layering consistent across the arch. That combination is harder to get right than it looks. Dani Dental builds hybrid acrylic/titanium prosthetics on milled titanium frameworks using a digital workflow that starts the moment you submit an intraoral scan or CBCT file. No refractory dies, no analog guesswork at the framework-acrylic interface.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Tempe practices running high-volume full-arch implant cases need a lab that can hold tolerances on titanium bar milling while keeping acrylic layering consistent across the arch. That combination is harder to get right than it looks. Dani Dental builds hybrid acrylic/titanium prosthetics on milled titanium frameworks using a digital workflow that starts the moment you submit an intraoral scan or CBCT file. No refractory dies, no analog guesswork at the framework-acrylic interface.

THE DETAIL

How we build it.

Most national-volume labs processing All-on-X hybrid cases route them through a digital production line where no single technician owns the case end to end. The framework comes out of one department, acrylic processing happens in another, and quality review is a checklist item rather than a craftsperson looking at the finished piece. Dani Dental is structured the opposite way: named-technician case ownership from framework design through final polish, with one direct point of contact for the Tempe clinician throughout. Agency-tier dental labs in this category typically offer remake warranties but bury the process in a procurement loop that can add seven to fourteen days before a corrected case ships. Dani's remake protocol is straightforward: if the issue is attributable to lab production, the corrected case moves to the front of the fabrication queue. No forms, no account manager middleman. The technician who built it owns the correction. For Tempe practices that have grown past two or three full-arch cases per month, the communication gap at large-network labs starts showing up as chair-time loss. A misfit that takes four days to diagnose and ten days to correct costs more in schedule disruption than the lab fee itself. Transparent turnaround windows, a sub-2.5% remake rate, and a direct technician line are the variables Dani competes on. Price transparency is part of that: ranges are quoted upfront, not buried in a per-case negotiation.

GETTING CASES TO US

Logistics, to the bench.

Tempe practices running high-volume full-arch implant cases need a lab that can hold tolerances on titanium bar milling while keeping acrylic layering consistent across the arch. That combination is harder to get right than it looks. Dani Dental builds hybrid acrylic/titanium prosthetics on milled titanium frameworks using a digital workflow that starts the moment you submit an intraoral scan or CBCT file. No refractory dies, no analog guesswork at the framework-acrylic interface. The acrylic layer is processed and finished in-house, not outsourced to a separate denture facility. That matters because the hand-off between framework fabrication and acrylic processing is where most fit issues originate. Keeping both steps under one roof, with a named technician accountable for each case, cuts that source of variation. Tempe clinicians working same-day or next-day loading protocols can request expedited scheduling; call before noon and we can confirm timeline by end of business. Every hybrid case ships with the direct line of the technician who built it. If your patient presents for a try-in and something is off, you reach the person who can tell you exactly what happened and what the fastest correction path looks like. That is not a helpdesk callback loop. It is a direct conversation with the bench.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for All-on-X hybrid cases from Tempe practices?
STL, OBJ, and DCM files from any major intraoral scanner or CBCT system are accepted. If your Tempe office uses a proprietary export format, contact the lab before submitting the first case. Most systems export a compatible format through the settings menu. We confirm file receipt and flag any resolution issues within four business hours of upload.
Can Dani Dental accommodate same-day loading protocols for Tempe All-on-X cases?
Yes, with advance scheduling. Tempe clinicians planning same-day or next-day loading procedures should contact the lab at least 48 hours before the surgical date to reserve expedited fabrication time. Provisional hybrid cases require a confirmed scan file and implant analog positioning data before fabrication begins. Call before noon on the day of file submission for same-business-day timeline confirmation.
How is the acrylic-to-titanium interface handled to prevent delamination?
The titanium framework is surface-treated before acrylic processing to maximize mechanical retention at the interface. Acrylic is applied and cured in-house on the same framework, not shipped to a secondary facility. The named technician inspects the interface at each processing stage. This approach reduces the delamination risk that typically originates when framework fabrication and acrylic processing are performed in separate facilities.
What does Dani Dental's remake process look like if a hybrid case does not seat correctly?
Contact the lab directly at the technician's line included with every shipment. The technician reviews the clinical photos or scan data you send, identifies whether the issue is lab-side or impression-side, and confirms the correction path within one business day. Lab-attributable issues move to the front of the fabrication queue. The target for a corrected hybrid case is five business days from confirmed remake authorization.
Does Dani Dental fabricate the titanium framework in-house or outsource it to a milling center?
Titanium bar milling for All-on-X hybrid frameworks is performed through a vetted digital milling partner integrated into Dani's digital workflow. The design file is prepared and reviewed in-house before it leaves for milling, and the framework is received and inspected at Dani's lab before acrylic processing begins. The Tempe clinician has a single point of contact throughout. No separate vendor coordination is required from the practice side.
What turnaround should a Tempe practice expect for a standard hybrid acrylic/titanium case?
Standard turnaround for a final hybrid case is five business days from design approval confirmation. Provisional hybrid cases with a complete scan file and implant positioning data can be quoted for expedited timelines. Turnaround windows are stated in the case confirmation email, not estimated verbally. If a timeline changes due to milling or processing variables, the lab contacts the Tempe practice before the original delivery date passes.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician