1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

San Antonio 3D-Printed Restoration

San Antonio dentists running a modern digital workflow need a lab that keeps up with what intraoral scanners and chairside CBCT data actually make possible. Dani Dental's 3D-printed restoration service accepts scans from all major IOS platforms including iTero, 3Shape TRIOS, and Medit, and converts that data into printed restorations, printed temporaries, and printed surgical or prosthetic components without the friction of file-conversion back-and-forth. The lab's design team reviews every STL before production touches it.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

San Antonio dentists running a modern digital workflow need a lab that keeps up with what intraoral scanners and chairside CBCT data actually make possible. Dani Dental's 3D-printed restoration service accepts scans from all major IOS platforms including iTero, 3Shape TRIOS, and Medit, and converts that data into printed restorations, printed temporaries, and printed surgical or prosthetic components without the friction of file-conversion back-and-forth. The lab's design team reviews every STL before production touches it.

THE DETAIL

How we build it.

Most national-network labs that serve San Antonio run 3D-printed cases through a centralized production queue where the file you submitted is handled by whoever is available that shift. There is no named technician, no direct line, and no one accountable when the fit is off by 30 microns. Dani Dental assigns a named technician to your account. That person reviews your scan, flags margin ambiguities before printing rather than after, and is reachable by phone within business hours, not through a ticket system with a 48-hour reply window. The other common pattern in this market is a regional lab that added a single desktop printer as an upsell, without investing in validated resin libraries, print orientation protocols, or post-cure QC. The difference shows up in fit consistency across a batch, not just on a single crown. Dani Dental runs a dedicated 3D-print workflow, not a sideline service bolted onto a conventional crown-and-bridge operation. That means the technician reviewing your file has printed hundreds of cases in this category, not dozens. On the communication side: every 3D-printed case that ships from Dani Dental includes a brief case note documenting the resin used, print orientation, and any design decisions made at the digital design stage. If a remake is ever needed, that documentation cuts diagnosis time to minutes instead of a guessing exercise. San Antonio practices that have moved their printed restoration volume to Dani Dental report fewer remake calls and faster resolution when a fit question does come up.

GETTING CASES TO US

Logistics, to the bench.

San Antonio dentists running a modern digital workflow need a lab that keeps up with what intraoral scanners and chairside CBCT data actually make possible. Dani Dental's 3D-printed restoration service accepts scans from all major IOS platforms including iTero, 3Shape TRIOS, and Medit, and converts that data into printed restorations, printed temporaries, and printed surgical or prosthetic components without the friction of file-conversion back-and-forth. The lab's design team reviews every STL before production touches it. For San Antonio practices that book high-volume cosmetic days or run same-day prep workflows, 3D-printed temporaries and provisionals are a direct chair-time tool. A printed provisional that fits precisely means fewer adjustment passes and a patient who leaves on time. Dani Dental ships printed provisionals as a standalone order or as part of a full-arch or implant case package, and every order ships with the direct line of the technician who ran the file. The restorations use validated printing resins selected for the specific application: interim resins for temporaries, high-strength photopolymers for longer-duration wear, and printed dies or models as needed for your in-office workflow. If your practice is in the San Antonio metro and you are still dropping physical impressions in a box for this category of work, the switch to a fully digital submission typically cuts your turnaround by two or more days on the first case.

COMMON QUESTIONS

What practices ask

Which intraoral scanner formats does Dani Dental accept for 3D-printed restoration cases?
Dani Dental accepts STL, PLY, and OBJ files from all major IOS platforms including iTero, 3Shape TRIOS, Medit, Carestream, and Planmeca. Submit through the secure upload portal or via your scanner's direct send if the integration is active. If your file format is outside that list, contact the lab before submission and the digital team will confirm compatibility within one business day.
How long does a 3D-printed restoration case take to arrive at my San Antonio practice?
Standard turnaround is 3-5 business days from verified scan receipt. Rush production at 1-2 business days is available for single-unit printed restorations and printed temporaries, subject to queue availability. San Antonio-area practices typically receive cases via next-business-day shipping, so the production window is the primary variable. Confirm rush eligibility when you submit the case.
What resins does Dani Dental use for 3D-printed temporaries versus longer-duration restorations?
Interim temporaries use a validated bis-acryl photopolymer resin rated for 30-90 day wear. Longer-duration printed restorations, including extended provisionals and certain monolithic applications, use a high-strength permanent resin. Every case note shipped with the order documents the specific resin and post-cure protocol used, so your records reflect the actual material in the patient's mouth.
Can I order just 3D-printed provisionals without a full-arch or implant case package?
Yes. Printed provisionals and temporaries are available as standalone orders. Submit the intraoral scan or preparation file, specify the provisional design parameters, and the lab produces the printed temporary as a single-item order. This is commonly used by San Antonio practices running high-volume cosmetic or prep days where chair-time efficiency on the provisional stage is a direct scheduling variable.
How does Dani Dental handle fit issues on a 3D-printed restoration?
Every printed case ships with a case note that documents resin selection, print orientation, and design decisions made during file review. If a fit issue arises, that documentation reduces diagnosis time from a guessing process to a targeted review of one or two variables. Remake requests are handled by the same named technician who ran the original file, not reassigned to whoever is available.
Does the lab's 3D-printing capability extend to surgical guides or implant components?
Yes. In addition to crown-and-bridge provisionals and restorations, Dani Dental produces printed surgical guides, printed implant-level models, and printed components for full-arch implant cases including All-on-X workflows. CBCT data in DICOM format is accepted for guide design. Contact the lab to confirm the specific guide design protocol and required scan data before submitting an implant surgical guide case.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician