1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Salt Lake City Milled Restoration

Salt Lake City practices run a demanding mix of cosmetic and restorative caseloads, from the high-aesthetic single-unit veneers and crowns in the Sugar House corridor to the full-arch implant work increasingly common in South Jordan and Draper suburban practices. Dani Dental's milled-restoration workflow starts with your intraoral scan or CBCT file, mills from curated zirconia and lithium disilicate blocks, and returns a restoration with margin accuracy held to 25 microns or better. No wax-up delay, no refractory die guesswork.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Salt Lake City practices run a demanding mix of cosmetic and restorative caseloads, from the high-aesthetic single-unit veneers and crowns in the Sugar House corridor to the full-arch implant work increasingly common in South Jordan and Draper suburban practices. Dani Dental's milled-restoration workflow starts with your intraoral scan or CBCT file, mills from curated zirconia and lithium disilicate blocks, and returns a restoration with margin accuracy held to 25 microns or better. No wax-up delay, no refractory die guesswork.

THE DETAIL

How we build it.

Most regional and national-network labs routing through Utah route Salt Lake City cases through a central milling hub in another state, then ship back through a distribution center. That two-leg logistics path adds 2 to 4 days and removes the possibility of a same-technician conversation mid-case. Dani Dental operates as a single-facility lab where the technician who designs the crown is also the one who calls you if the scan margin reads ambiguous, not a call-center relay. Large volume-tier labs in this category compete on price per unit at scale, which works if your practice sends 80 or more units a month. For Salt Lake City practices in the 10-to-40 unit monthly range, that model means your account sits in a mid-tier service tier with no named contact and 7-to-10-day standard turnaround. Dani's named-technician model applies from case one, not from a volume threshold. On materials, Dani sources zirconia blocks from suppliers whose lot-to-lot shade consistency has been validated against VITA Classical references. When a shade on a BL2 or A1 anterior crown deviates from the submitted prescription, the technician contacts the submitting practice before the case ships, not after the patient is seated. That one protocol alone accounts for the majority of the remake-rate reduction Salt Lake City accounts report in their first 90 days.

GETTING CASES TO US

Logistics, to the bench.

Salt Lake City practices run a demanding mix of cosmetic and restorative caseloads, from the high-aesthetic single-unit veneers and crowns in the Sugar House corridor to the full-arch implant work increasingly common in South Jordan and Draper suburban practices. Dani Dental's milled-restoration workflow starts with your intraoral scan or CBCT file, mills from curated zirconia and lithium disilicate blocks, and returns a restoration with margin accuracy held to 25 microns or better. No wax-up delay, no refractory die guesswork. For Salt Lake City doctors sending posterior monolithic zirconia, the mill path is optimized for occlusal contact density and interproximal emergence profile, so your seating appointments move in under 10 minutes rather than requiring chairside adjustment. Anterior e.max cases go through a separate characterization review by the same named technician who milled the unit, not a generic QC line. Rush orders for Salt Lake City accounts can be flagged at case submission for a 3-business-day path. Scans submitted via iTero, 3Shape, or Medit are accepted natively. No STL conversion fee, no file-prep surcharge.

COMMON QUESTIONS

What practices ask

What scan formats does Dani Dental accept for milled-restoration cases from Salt Lake City?
iTero, 3Shape Trios, and Medit files are accepted natively. Dani Dental also accepts open-format STL files. No conversion fee applies to any of these formats. If your practice uses a newer scanner not listed here, contact your assigned technician before the first case submission and the team will confirm compatibility within one business day.
How long does a standard milled-crown turnaround take for a Salt Lake City practice?
Cases received with a complete scan and prescription by noon ship within 5 business days to Salt Lake City metro addresses. Rush cases flagged at submission ship within 3 business days. Turnaround is measured from scan receipt to shipping label, not from delivery, so transit time adds roughly 1 day for Utah addresses via standard overnight carrier.
Which zirconia and ceramic materials are available for milled restorations?
Dani Dental mills from monolithic zirconia in 3Y, 4Y, and 5Y formulations, as well as multilayer zirconia for anterior cases requiring gradient translucency. Lithium disilicate (e.max CAD) is available for single-unit anterior crowns, veneers, and inlays. Material selection is confirmed at case submission; the assigned technician will flag any mismatch between the requested material and the clinical indication before milling begins.
Does Dani Dental offer implant-supported milled crowns and screw-retained restorations?
Yes. Implant-supported milled crowns and screw-retained monolithic restorations are part of the standard milled-restoration workflow. Cases require a scan body identifier and implant platform noted on the prescription. Dani Dental maintains a library covering the major implant systems; if your system is not in the library, the technician will request a physical impression or a verified scan body file before proceeding.
What happens if a milled restoration does not seat correctly after delivery?
Contact your named technician directly, not the general inbox. Provide a brief description and an intraoral photo or scan of the seating issue. Dani Dental's policy is to resolve remake requests within 24 hours of receiving that information, and to ship the corrected restoration on a priority path. The technician who made the original unit reviews the remake, so the fix addresses the root cause rather than repeating the same workflow.
Can a Salt Lake City practice send cases without an existing Dani Dental account?
New accounts are set up in under 24 hours with no minimum case commitment. Salt Lake City practices can request a Doctor Kit that includes sample zirconia and e.max shade tabs, a prescription pad, and the direct technician contact for the account. The first case ships under the same turnaround guarantee as established accounts, 5 business days standard or 3 days on the rush path.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician