1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Peoria Mandibular Advancement Device

Mandibular advancement devices require a tighter fit tolerance than almost any other removable appliance. A device that seats 0.5mm off midline or binds on the second molar will be returned by the patient inside a week. For Peoria-area dentists managing obstructive sleep apnea cases alongside a general or specialty schedule, that remake cycle is expensive in chair time and patient trust. Dani Dental fabricates MADs from calibrated PVS impressions or intraoral scan files, with protrusion set to the dentist's prescribed starting position.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Mandibular advancement devices require a tighter fit tolerance than almost any other removable appliance. A device that seats 0.5mm off midline or binds on the second molar will be returned by the patient inside a week. For Peoria-area dentists managing obstructive sleep apnea cases alongside a general or specialty schedule, that remake cycle is expensive in chair time and patient trust. Dani Dental fabricates MADs from calibrated PVS impressions or intraoral scan files, with protrusion set to the dentist's prescribed starting position.

THE DETAIL

How we build it.

Most national-scale dental labs route sleep appliance cases through a centralized triage queue. The dentist gets a case number and a generic status update. When a fit question comes up after delivery, the path back to the fabricating technician runs through three layers of customer service. That model works fine for high-volume crown and bridge. It is the wrong structure for MADs, where a single millimeter of discrepancy in the bite registration changes the clinical outcome. Dani Dental operates differently on every sleep appliance case. The device is assigned to one technician, that technician's name goes on the case paperwork, and their direct contact number ships with the finished appliance. If you seat the device and something is off, the call goes directly to the person who built it. No ticket system, no escalation queue. That accountability structure is the reason the remake rate stays below 2.5% rather than drifting into the 6 to 8 percent range that agency-tier volume labs report for removable appliances. On materials: Dani sources thermoplastic blanks and hard acrylic components from the same supply chain used by dental school programs in Arizona, which keeps consistency high across batches. Regional labs that fabricate MADs only occasionally tend to order materials in small runs, which introduces batch variation that shows up as inconsistent hardness or color shift between cases. For Peoria dentists building a sleep medicine referral network, that kind of case-to-case inconsistency is a credibility problem. Consistent materials, named technician, direct communication: those three things are what we offer and what we hold ourselves to.

GETTING CASES TO US

Logistics, to the bench.

Mandibular advancement devices require a tighter fit tolerance than almost any other removable appliance. A device that seats 0.5mm off midline or binds on the second molar will be returned by the patient inside a week. For Peoria-area dentists managing obstructive sleep apnea cases alongside a general or specialty schedule, that remake cycle is expensive in chair time and patient trust. Dani Dental fabricates MADs from calibrated PVS impressions or intraoral scan files, with protrusion set to the dentist's prescribed starting position. Every case ships with the direct line of the technician who built it. The West Valley dental market has grown steadily alongside Peoria's residential expansion. More households means more patients presenting with sleep-disordered breathing, more dentists adding dental sleep medicine to their offering, and more volume that needs a reliable lab relationship. Dani Dental has supported Arizona practices in this space since the early 2000s, so the workflow is not experimental. Titratable designs, dual-laminate options, and soft-hard combination materials are all available depending on how the clinician wants to manage advancement over the titration period. Order intake is straightforward: submit a scan or impression with your bite registration and prescribed protrusion percentage, and the case enters fabrication the same business day it arrives. If the scan quality triggers a concern, a technician calls within four business hours rather than letting the case sit and miss a delivery window. Peoria practices typically see finished devices arrive within 10 to 14 business days from receipt, with expedited scheduling available at 7 days on request.

COMMON QUESTIONS

What practices ask

What bite registration format do you accept for MAD cases from Peoria practices?
Dani Dental accepts George Gauge registrations, leaf gauge bites, and digital protrusion records exported from intraoral scanner software. Submit the protrusion percentage or millimeter measurement alongside the registration. If the record arrives without a prescribed starting position, a technician will call within four business hours to confirm before the case enters fabrication. We do not assume a default setting.
Can I submit an intraoral scan instead of a PVS impression for a mandibular advancement device?
Yes. Dani Dental accepts STL and OBJ files from all major intraoral scanner platforms including iTero, 3Shape TRIOS, and Medit. Scan files are reviewed on receipt. If occlusal detail in the posterior region is insufficient for accurate articulation, you will hear from a technician the same day. Physical impressions remain an option for practices that prefer them.
What appliance designs does Dani Dental fabricate for dental sleep medicine cases?
Current in-house designs include the EMA (Elastic Mandibular Advancement), Herbst-style rigid advancement, and custom titratable appliances with anterior adjustment hardware. Dual-laminate construction using a soft inner layer bonded to a rigid outer shell is available for patients with bruxism comorbidity. Let us know at the case submission stage which design you are prescribing and we will confirm materials and timeline before fabrication begins.
How quickly can Dani Dental turn around a rush MAD case for a Peoria patient?
Standard production for mandibular advancement devices is 10 to 14 business days from receipt of impressions or scan files. Expedited cases targeting a 7-business-day delivery are accommodated on request, subject to current lab volume. Contact the lab before submitting to confirm expedited availability for your specific case date. Rush fees apply and are quoted upfront.
What happens if a MAD I receive does not seat correctly at the delivery appointment?
Call the technician named on the case paperwork directly. Every Dani Dental sleep appliance ships with that person's direct line, not a general support number. Describe the seating issue and we will determine within the call whether the correction is a chairside adjustment or a lab return. If it is a lab return, we prioritize the remake and cover shipping both directions. Our goal is resolution in under five business days from the return call.
Does Dani Dental work with Peoria dentists who are new to dental sleep medicine?
Yes. If you are establishing a sleep medicine protocol for the first time, our technicians can walk through case submission requirements, bite registration options, and appliance design tradeoffs on a 20-minute call before your first case. We do not charge for that consult. Getting the first case right matters more to us than processing it fast, and a 20-minute conversation upfront usually prevents two rounds of remakes.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician