1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Henderson Implant-Supported Overdenture

Henderson dentists placing two to four implants for overdenture retention need a lab that understands the full continuum, from the intraoral scan or traditional impression through attachment selection, processing, and post-delivery adjustments. Dani Dental fabricates implant-supported overdentures using milled acrylic frameworks paired with your choice of Locator, Locator R-Tx, Hader bar, or ball-attachment housings. Every case file includes a technician note specifying the torque protocol used on the retention housing, so your chairside team is not guessing when the patient sits down.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Henderson dentists placing two to four implants for overdenture retention need a lab that understands the full continuum, from the intraoral scan or traditional impression through attachment selection, processing, and post-delivery adjustments. Dani Dental fabricates implant-supported overdentures using milled acrylic frameworks paired with your choice of Locator, Locator R-Tx, Hader bar, or ball-attachment housings. Every case file includes a technician note specifying the torque protocol used on the retention housing, so your chairside team is not guessing when the patient sits down.

THE DETAIL

How we build it.

National-network labs process overdenture cases through a routing system where the clinician rarely knows which technician touched the case. For a prosthetic as retention-dependent as an overdenture, that anonymity creates real risk. At Dani Dental, every Henderson overdenture case is assigned to a named technician before fabrication begins. That technician's direct line ships with the case. If an attachment housing needs adjustment two weeks post-delivery, you call the person who built it, not a general intake desk. Large regional production labs in this category often standardize on a single attachment system because it simplifies their floor workflow. That works for their throughput numbers, not for your patient's anatomy. Dani supports three attachment configurations in-house, and the selection recommendation comes from a technician who has reviewed your implant placement data, not a dropdown menu on an order form. Implant angulation outside the 10-degree ideal? The technician flags it before processing and proposes the correct housing offset, saving a remake. The three-generation bench history behind Dani Dental, from Sofia in 1988 through Arizona since 1993, means the technical judgment on a complex overdenture case draws on decades of analog craft now applied with fully digital documentation. That combination is genuinely rare among labs serving the Henderson and greater Las Vegas corridor. Transparent pricing, a stated 5-day standard turnaround, and no procurement maze between you and the person holding the articulator are the practical result.

GETTING CASES TO US

Logistics, to the bench.

Henderson dentists placing two to four implants for overdenture retention need a lab that understands the full continuum, from the intraoral scan or traditional impression through attachment selection, processing, and post-delivery adjustments. Dani Dental fabricates implant-supported overdentures using milled acrylic frameworks paired with your choice of Locator, Locator R-Tx, Hader bar, or ball-attachment housings. Every case file includes a technician note specifying the torque protocol used on the retention housing, so your chairside team is not guessing when the patient sits down. The Henderson market includes a high proportion of retirement-age patients, which means overdenture volume is consistent and the margin for fit error is low. A denture that rocks on delivery costs you 45 to 90 minutes of chair time to troubleshoot and erodes patient confidence fast. Our processing workflow includes a full-contour wax try-in stage by default, not as an upsell, because catching occlusal discrepancies at wax is four times faster to resolve than correcting them in acrylic. Digital cases accepted via STL upload directly from your intraoral scanner. Analog cases accepted with polyvinyl siloxane or polyether impressions alongside your bite record and shade prescription. If you are transitioning from conventional dentures to implant-supported prosthetics for a patient and want a conversion consultation, call the lab line and ask for the overdenture technician. You will reach a person, not a queue, within the same business day.

COMMON QUESTIONS

What practices ask

Which attachment systems does Dani Dental support for implant-supported overdentures?
We fabricate cases with Locator, Locator R-Tx, Hader bar, and ball-attachment housings. All three configurations are built in-house, so you are not waiting on a secondary lab for bar work. Attachment selection is reviewed case-by-case based on your implant placement data and the patient's bone volume. If angulation is outside the standard range, the assigned technician contacts you before processing begins.
What is the standard turnaround for an overdenture case shipped to Henderson?
Standard turnaround is 5 business days from receipt of a complete case, meaning impressions or STL files, bite record, shade, and implant position documentation. Rush options at 3 business days are available for an additional fee. Cases missing any element of the prescription are held and flagged same-day rather than processed with assumptions, which is the fastest way to avoid a remake.
Do you accept digital impressions, or only traditional impressions?
Both. STL files from any major intraoral scanner are accepted via direct upload. Analog cases ship with polyvinyl siloxane or polyether impressions. If your scanner exports a proprietary format, contact the lab before submitting and we will confirm compatibility. Digital cases typically reduce turnaround by one day because there is no model-pour step.
Is a wax try-in included as a standard stage?
Yes. Full-contour wax try-in is a default stage on every overdenture case, not an add-on. This lets you verify occlusion, midline, tooth position, and phonetics before we process in acrylic. Catching discrepancies at wax takes roughly 20 minutes to correct. Catching the same issue post-processing takes 45 to 90 minutes of chair time and risks the acrylic bond integrity.
How do Henderson dentists reach the technician assigned to their case?
Every case ships with a technician note that includes the assigned technician's direct line. You are not calling a general intake queue. For post-delivery questions, seating adjustments, or a follow-up consultation on a complex implant angulation situation, you reach the person who fabricated the prosthetic, typically within the same business day. This is standard practice at Dani Dental, not a premium tier.
What documentation should accompany an overdenture prescription?
A complete overdenture prescription includes the impression or STL file, centric relation bite record, implant analog positions or scan body data, shade selection, and any existing vertical dimension reference if converting from a conventional denture. If the patient has notable ridge resorption or implant angulation outside 10 degrees, include a note so the technician can recommend the correct housing offset before fabrication.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician