1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Goodyear E.max Lithium Disilicate Crown

E.max lithium disilicate is the benchmark material for single-unit anterior and premolar crowns where translucency and flexural strength both matter. At 400 MPa flexural strength, it holds up in low-to-moderate occlusal load zones while passing light in a way that monolithic zirconia still cannot fully replicate. For Goodyear practices placing crowns in the aesthetic zone, that distinction is not academic.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

E.max lithium disilicate is the benchmark material for single-unit anterior and premolar crowns where translucency and flexural strength both matter. At 400 MPa flexural strength, it holds up in low-to-moderate occlusal load zones while passing light in a way that monolithic zirconia still cannot fully replicate. For Goodyear practices placing crowns in the aesthetic zone, that distinction is not academic.

THE DETAIL

How we build it.

National-network labs processing thousands of units per week route West Valley cases through regional intake hubs before a technician ever touches the file. That model works for volume. It does not work when an anterior e.max crown on a central incisor needs to match a laterally restored tooth that was built three years ago and the shade tab is a guess. Dani Dental assigns a named technician to each account. The dentist in Goodyear talks to that person directly, not to a rotating support rep reading case notes off a screen. Agency-tier ceramic labs with lower price floors often achieve those numbers through pressed e.max blanks characterized with surface stain only. Dani's anterior e.max workflow uses cutback and layering on cases where depth and incisal translucency are clinically indicated, with the decision made at the technician level and documented in the case file. That adds time. It also means the crown looks like a tooth under multiple light sources, not just the operatory lamp. Goodyear's dental corridor along I-10 and Litchfield Road has grown with the city's population, which crossed 110,000 residents in 2023. Practices here are not suburban satellites anymore; they are full-service offices doing comprehensive cosmetic cases. A lab partner that treats West Valley accounts as a secondary market is a mismatch. Dani Dental's Phoenix-area roots mean Goodyear accounts are on the same delivery circuit as Chandler and Scottsdale with no added freight time or handling.

GETTING CASES TO US

Logistics, to the bench.

E.max lithium disilicate is the benchmark material for single-unit anterior and premolar crowns where translucency and flexural strength both matter. At 400 MPa flexural strength, it holds up in low-to-moderate occlusal load zones while passing light in a way that monolithic zirconia still cannot fully replicate. For Goodyear practices placing crowns in the aesthetic zone, that distinction is not academic. Dani Dental mills and characterizes each e.max unit in-house. Cases coming from West Valley practices arrive as either intraoral scans via open-format STL or as PVS impressions poured same day at the lab. Either path feeds the same CAD workflow, so accuracy at the margin is not dependent on how the case was captured. Standard single-unit turnaround runs five business days; rush cases qualifying for the three-day track are assessed at intake and confirmed within two hours of arrival. Shade work is where the generational craft shows up. Anterior e.max cases receive a written shade protocol note with every unit, identifying the specific Vita or Ivoclar reference, any custom staining applied, and the technician's direct line for pre-seat questions. If a crown seats and the shade is off, that conversation happens with the person who built it, not a customer service queue.

COMMON QUESTIONS

What practices ask

Which cases from a Goodyear practice are best suited for e.max lithium disilicate versus full-contour zirconia?
E.max is the right call for anterior teeth and premolars where translucency is a clinical priority and occlusal forces are moderate. Full-contour zirconia handles bruxers and posterior cases with heavy lateral excursions better. If you send a case and the prep photos indicate parafunction or a deep vertical overlap, the assigned technician flags it before milling rather than after seating.
Does Dani Dental accept intraoral scans from Goodyear practices, or only PVS impressions?
Both. Open-format STL files from any major intraoral scanner are accepted and preferred for e.max cases because the digital margin is cleaner than a poured model in most cases. PVS impressions are poured same day at the lab. Neither workflow adds days to the five-business-day standard turnaround for single-unit e.max crowns.
What is the remake policy for e.max crowns that do not seat correctly at delivery?
If a crown does not seat within clinically acceptable tolerances at delivery and the cause is traceable to lab fabrication, Dani Dental remakes it at no charge. The case goes back to the original technician, not a different bench. The lab's trailing-12-month remake rate for e.max units sits below 2.5%, documented against named-technician case logs.
How are shade-matching questions handled after a crown ships from the lab?
Every anterior e.max case ships with a written shade protocol note and the direct line of the technician who built the unit. Pre-seat shade questions go straight to that person, not through a general inbox. If the crown needs to come back for shade adjustment before cementation, standard turn on the adjustment is two business days.
Can Goodyear practices request a rush turnaround on e.max crowns?
Yes. Three-business-day rush is available on single-unit e.max cases. Eligibility is confirmed within two hours of case arrival based on current bench load. Rush cases require either a clean intraoral scan or a pour-quality impression; cases that need remediation are moved to the standard five-day track and the practice is notified the same day.
Does the e.max crown workflow at Dani Dental use pressed or milled blanks?
Both techniques are available. Posterior e.max cases typically use full-contour milled blanks characterized with stain and glaze for efficiency. Anterior cases where layered translucency is indicated use a cutback-and-layer approach on top of the milled substructure. The technician documents the method in every case file, so the dentist knows exactly what was built and how.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician