1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Goodyear All-on-X Hybrid (Acrylic/Titanium)

All-on-X hybrid prosthetics sit at the intersection of structural engineering and esthetic craft. The titanium substructure provides the load-bearing backbone; the acrylic overlay handles the esthetic layer that patients see and feel every day. Getting that interface right, specifically milled titanium bar geometry, acrylic bond surface prep, and occlusal scheme, requires a lab that treats these cases as a distinct workflow rather than a modified denture job.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

All-on-X hybrid prosthetics sit at the intersection of structural engineering and esthetic craft. The titanium substructure provides the load-bearing backbone; the acrylic overlay handles the esthetic layer that patients see and feel every day. Getting that interface right, specifically milled titanium bar geometry, acrylic bond surface prep, and occlusal scheme, requires a lab that treats these cases as a distinct workflow rather than a modified denture job.

THE DETAIL

How we build it.

Most dental labs in the West Valley market either outsource their titanium milling to a third-party milling center or run hybrids through a generalist restorations workflow with no dedicated protocol. The result is a prosthetic that looks like a hybrid but performs like a modified denture: acrylic that delaminates at 18 to 24 months, a bar that requires adjustment at delivery because the milling spec was not reviewed against the implant angulation data. Dani Dental mills titanium bars in-house and applies acrylic processing under a protocol built specifically for All-on-X geometries. That means the technician who designs the bar is the same technician who reviews the occlusal scheme and signs off on the finished case. No handoff between a milling department and a denture department. No lost context. The named-technician model that Dani uses on all implant cases is not a marketing phrase; it is a production accountability structure where one person owns the outcome from scan acceptance to ship. For Goodyear practices comparing lab options, the practical test is simple: ask any lab candidate how they handle a case where the try-in reveals a seating issue caused by bar design. At Dani, that conversation happens with the technician who built the bar, not a customer service representative reading from a case file. That direct line shortens resolution time from days to hours, which protects the patient appointment slot and keeps your chair moving.

GETTING CASES TO US

Logistics, to the bench.

All-on-X hybrid prosthetics sit at the intersection of structural engineering and esthetic craft. The titanium substructure provides the load-bearing backbone; the acrylic overlay handles the esthetic layer that patients see and feel every day. Getting that interface right, specifically milled titanium bar geometry, acrylic bond surface prep, and occlusal scheme, requires a lab that treats these cases as a distinct workflow rather than a modified denture job. For Goodyear-based practices, Dani Dental accepts intraoral scans from any major scanner platform (iTero, Trios, Medit) as well as conventional impressions with an analog workflow conversion. CBCT data integration is available for implant-position verification before fabrication begins. The West Valley's growing patient base skews toward full-arch restorative work driven by long-term periodontal compromise and late-presenting edentulism, and Dani's hybrid workflow is calibrated to handle that volume without the 10-to-14-day turnaround that national clearinghouse labs routinely quote. Every hybrid case receives a pre-fabrication case review. If the scan data flags an implant angle or inter-arch discordance that would compromise seating, the technician flags it before milling starts, not after. That review adds roughly 4 hours to case initiation and saves an average of one unnecessary try-in appointment.

COMMON QUESTIONS

What practices ask

What scan formats does Dani Dental accept for All-on-X hybrid cases from Goodyear practices?
Dani accepts STL and PLY files from iTero, Trios, and Medit scanners directly. DICOM data from CBCT imaging is accepted for implant-position verification. Conventional PVS impressions are also accepted and converted to a digital workflow in-house before fabrication begins. If your practice uses a scanner not listed here, contact the lab before submission and a technician will confirm compatibility within 4 business hours.
How long does a standard All-on-X hybrid case take from scan receipt to ship?
The standard turnaround for an acrylic-over-titanium hybrid is 5 business days from the point scan data is accepted and the case review is complete. Rush processing targeting 3 business days is available for an additional fee. Cases that require a pre-fabrication CBCT review or significant angulation correction add approximately 1 business day to that window. Goodyear-area practices can coordinate same-day pickup through the lab's West Valley courier arrangement.
What is included in the pre-fabrication case review Dani Dental performs?
Before milling begins, the assigned technician reviews implant angulation data against the prosthetic design to flag seating risks, occlusal scheme against the opposing arch records, and inter-arch space adequacy for the acrylic overlay thickness. If the review surfaces an issue, the technician contacts the submitting practice directly, within 4 business hours, with a specific corrective option. This review is included in the case fee, not billed separately.
Is the titanium bar milled in-house or sent to a third-party milling center?
Titanium bar milling is performed in-house at Dani Dental's Arizona facility. The technician who designs the bar is the same technician who reviews the finished prosthetic before shipping. No external milling vendor is involved in the standard hybrid workflow. This keeps the design intent intact through fabrication and eliminates the communication gap that typically causes seating adjustments at delivery.
How does Dani Dental handle a seating issue discovered at the try-in appointment?
If a seating problem surfaces at try-in and is attributable to a bar design or fabrication variance, the assigned technician is the first point of contact. The practice calls or texts the direct number on the case card. The technician reviews the reported issue, requests photos or a new scan if needed, and provides a resolution timeline, typically within the same business day. Remake decisions are made by the technician, not a customer service tier.
Can Goodyear practices coordinate courier pickup rather than shipping cases?
Yes. Dani Dental's West Valley courier route covers Goodyear and adjacent zip codes including Avondale and Litchfield Park. Pickup can be scheduled on most business days with 24-hour advance notice. Cases picked up before noon on a given day count as same-day receipt for turnaround purposes. Contact the lab to confirm your specific address is on the active courier route before submitting your first case via this method.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician