1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Glendale Porcelain-Fused-to-Metal Crown

Porcelain-fused-to-metal crowns remain a high-volume workhorse for Glendale practices managing posterior restorations where flexural strength matters as much as esthetics. Dani Dental's PFM workflow starts with your choice of delivery: conventional PVS impression or a digital STL file from your intraoral scanner. Either path feeds the same metal-coping fabrication sequence, where alloy selection (high-noble, noble, or base-metal per your prescription) is documented case-by-case, not batched by default.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Porcelain-fused-to-metal crowns remain a high-volume workhorse for Glendale practices managing posterior restorations where flexural strength matters as much as esthetics. Dani Dental's PFM workflow starts with your choice of delivery: conventional PVS impression or a digital STL file from your intraoral scanner. Either path feeds the same metal-coping fabrication sequence, where alloy selection (high-noble, noble, or base-metal per your prescription) is documented case-by-case, not batched by default.

THE DETAIL

How we build it.

Large national-network labs running PFM at high volume typically route cases through tiered production cells where no single technician owns the outcome. You get a tracking number, not a name. Dani Dental operates differently: every PFM crown is assigned to a specific ceramist at intake, and that assignment stays fixed through metal try-in, porcelain build, and final glaze. The technician's name travels with the case file. If your Glendale practice calls with a shade question at 4:45 PM, you reach the person with eyes on your model, not a general support queue. On quality accountability: the industry average remake rate for PFM crowns at high-volume commodity labs runs in the 4-6% range based on published dental laboratory benchmarking data. Dani Dental's trailing-12-month rate sits below 2.5%. That delta matters for a busy Glendale practice. Each remake costs chair time, patient inconvenience, and re-impression overhead. Cutting remake frequency in half translates directly to fewer rescheduled appointments and fewer write-offs on a case that already cleared margin. Pricing is quoted per-case with alloy tier and shade complexity factored in at prescription time, not discovered as a surprise on the invoice. No procurement maze, no tiered account minimums before you can access standard turnaround. New Glendale accounts receive the same 5-business-day production window as established accounts, starting on the first case.

GETTING CASES TO US

Logistics, to the bench.

Porcelain-fused-to-metal crowns remain a high-volume workhorse for Glendale practices managing posterior restorations where flexural strength matters as much as esthetics. Dani Dental's PFM workflow starts with your choice of delivery: conventional PVS impression or a digital STL file from your intraoral scanner. Either path feeds the same metal-coping fabrication sequence, where alloy selection (high-noble, noble, or base-metal per your prescription) is documented case-by-case, not batched by default. The porcelain application is hand-layered by a named technician, not mass-produced on an assembly line. That means the technician who builds the coping is the same person applying the feldspathic ceramic and signing off on the contacts and occlusal morphology. When the case ships to your Glendale practice, you receive the technician's direct line alongside it. If seating throws a question, you call the person who built it. For practices in the West Valley managing a mix of PPO and fee-for-service schedules, PFM remains a cost-effective restorative option that satisfies lab fee constraints without sacrificing marginal fit. Dani Dental holds tolerances to within 50 microns at the margin, verified on a calibrated digital measuring system before any case ships.

COMMON QUESTIONS

What practices ask

Do you accept digital impressions from Glendale practices, or only PVS?
Both. Dani Dental accepts STL files from all major intraoral scanners including iTero, 3Shape TRIOS, and Medit, as well as conventional PVS impressions shipped to our Arizona lab. Digital cases typically enter production faster because there is no pour-and-trim step. Either way, your 5-business-day turnaround clock starts when we confirm receipt of a usable impression or file.
Which alloys do you offer for PFM crowns, and how do I specify on the prescription?
We fabricate PFM copings in high-noble (greater than 60% noble metal), noble (25% or greater), and base-metal alloys. Specify your preference on the prescription form, or note 'insurance alloy' if the case needs to meet a specific reimbursement tier. If no alloy is specified, our technician will call before fabrication begins rather than defaulting without your input.
What is your remake policy if the crown does not seat correctly?
If a PFM crown from Dani Dental fails to seat due to a lab fabrication error, we remake it at no charge and prioritize the replacement case for 3-business-day turnaround. The assigned technician reviews the original model and the returned crown before restarting, so the second case addresses the specific failure point rather than simply repeating the first build.
Can I order a metal try-in before final porcelain application?
Yes, and for complex cases we recommend it. Specify 'metal try-in requested' on your prescription. We fabricate and ship the coping for chairside verification of marginal fit and contacts. Once you confirm fit and return the coping (or send a verification photo per our protocol), porcelain application proceeds. This adds approximately 2 business days to total case time but eliminates the most common source of PFM remakes.
How do shade matching and communication work for esthetic PFM cases?
Submit a Vita Classical or 3D-Master shade tab photo alongside your prescription. If the esthetic zone demands closer matching, request a custom shade consult and the assigned ceramist will contact you directly within 1 business day to discuss stump shade, translucency, and characterization notes. Glendale practices can also ship a shade tab from their own kit if preferred.
Is there a minimum case volume to open an account with Dani Dental?
No minimum. Glendale practices can submit a single PFM case to start. Account setup takes under 10 minutes via our online form, and your first case enters the same production queue as accounts we have worked with for years. Pricing, turnaround, and technician assignment are identical regardless of monthly volume at the point of onboarding.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician