1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Gilbert Mandibular Advancement Device

Gilbert practices ordering mandibular advancement devices from Dani Dental get a fully digital or analog-compatible workflow, whichever matches how your office already captures records. Send an intraoral scan (STL/OBJ via your preferred file-transfer portal) or a set of PVS impressions with a bite registration, and we handle the rest. Each MAD is fabricated from medical-grade thermoplastic in a titratable two-piece design, with advancement increments calibrated to the patient's vertical and protrusive range captured in the bite record.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Gilbert practices ordering mandibular advancement devices from Dani Dental get a fully digital or analog-compatible workflow, whichever matches how your office already captures records. Send an intraoral scan (STL/OBJ via your preferred file-transfer portal) or a set of PVS impressions with a bite registration, and we handle the rest. Each MAD is fabricated from medical-grade thermoplastic in a titratable two-piece design, with advancement increments calibrated to the patient's vertical and protrusive range captured in the bite record.

THE DETAIL

How we build it.

Large national lab networks process MADs in batch queues. Your case enters a ticket system, gets routed to whoever is available that shift, and ships with a generic spec sheet. If the fit is off, you open a remake ticket and wait. Dani Dental runs a named-technician model: one bench professional owns your case from design through delivery, and their direct line goes in the box. For Gilbert practices that have dealt with the opaque customer service chain at high-volume lab operations, the difference is a single phone call versus a help-desk loop. On the digital side, we are not offering a scan-to-print shortcut that skips clinical judgment. Every STL that comes in gets reviewed against the bite registration before any milling or printing begins. That review step is where errors are caught at zero cost versus being caught in the patient chair at high cost. Practices in the East Valley that have transitioned to full digital record capture find the file-to-device workflow fits cleanly into their existing intraoral scanner output with no intermediate model pour required, compressing the total case cycle by two to three days compared to a traditional impression-and-model route. Transparency on pricing is a documented pain point with lab procurement. Dani Dental provides a single-line fee for each MAD tier, no consumable surcharges added after the fact, no volume-minimum thresholds before you see the base rate. Gilbert practices ordering two cases a month get the same per-unit pricing clarity as practices ordering twenty.

GETTING CASES TO US

Logistics, to the bench.

Gilbert practices ordering mandibular advancement devices from Dani Dental get a fully digital or analog-compatible workflow, whichever matches how your office already captures records. Send an intraoral scan (STL/OBJ via your preferred file-transfer portal) or a set of PVS impressions with a bite registration, and we handle the rest. Each MAD is fabricated from medical-grade thermoplastic in a titratable two-piece design, with advancement increments calibrated to the patient's vertical and protrusive range captured in the bite record. Fit is the failure point for most appliances returned for remake. To reduce that risk, every device coming out of our Gilbert-area production queue is reviewed at the bench by the same technician who built it before shipping. If the occlusal seating looks marginal on the model, we call your office the same day rather than shipping and waiting for a chair complaint. That direct-communication protocol cuts downstream adjustment appointments, which means less uncompensated chair time for your team. Material selection is not one-size-fits-all here. Patients with heavier bruxing patterns get a harder durometer base with a softer liner; lighter-wear cases can run in a standard single-durometer block. We document the material choice on the prescription return sheet so your clinical notes reflect exactly what was placed. For practices in Gilbert managing sleep-related breathing referrals from ENT or pulmonology, we can also coordinate with your referring provider's titration protocol to build appropriate advancement increments into the device from the start.

COMMON QUESTIONS

What practices ask

What records do you need to fabricate a MAD for a Gilbert patient?
We need upper and lower impressions or STL files, a protrusive bite registration at 50-70% of maximum protrusion and 4-6 mm vertical, and a completed prescription indicating the patient's bruxing history and any titration protocol from their sleep physician. If you are sending a digital scan, STL and OBJ files from any major intraoral scanner are accepted. A model pour is not required for digital submissions.
How long does a mandibular advancement device take from submission to delivery in Gilbert?
Standard turnaround is 5-7 business days from the day we receive complete records. Rush cases for Gilbert-area practices can be accommodated in 3-4 business days with advance notice. We ship via tracked overnight carrier and notify your front desk by text or email when the case leaves our facility, so your appointment scheduling is not a guess.
What materials do you use for MAD fabrication?
We use medical-grade thermoplastic in two durometer options. Heavy bruxers or patients with documented parafunctional habits get a harder outer shell with a softer bite surface to reduce appliance fatigue. Standard cases run in a single-durometer block. The material choice is documented on the return prescription sheet for your clinical records, and our technician notes the rationale when either option departs from your prescription default.
Can I request advancement increments for a patient already in titration?
Yes. If your patient is being titrated by a sleep physician or has an existing home sleep test protocol, send us the starting and target protrusive measurements and we will build advancement markers into the device at the increments you specify. We can also fabricate a replacement appliance matched to the final titrated position if the patient has outgrown or lost their original device.
What happens if the MAD does not seat correctly?
Call the technician whose name is on the shipping label. Not a general inbox. That person built the case and can diagnose the fit issue in a five-minute conversation. If the cause is a lab error, we remake at no charge and expedite delivery. If the cause is a record issue, we will tell you exactly what record we need to correct before we remake, so the second version is right.
Do Gilbert practices need to meet a minimum order volume to work with Dani Dental on MADs?
No minimums. A single-provider Gilbert practice ordering one or two MADs a month receives the same per-unit pricing and the same named-technician service as a multi-location group. Pricing is published per device tier. There are no volume thresholds to unlock the base rate, and no consumable surcharges added after the case closes.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician