1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Gilbert Implant-Supported Overdenture

Gilbert practices sending implant-supported overdenture cases to Dani Dental get a straightforward intake path: intraoral scan or PVS impression, implant-level or abutment-level records, and a bite registration. From there, a named technician takes the case from design through finish. No routing through a generic queue. The clinician who calls with a question on day two is talking to the same person who milled the bar on day one.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Gilbert practices sending implant-supported overdenture cases to Dani Dental get a straightforward intake path: intraoral scan or PVS impression, implant-level or abutment-level records, and a bite registration. From there, a named technician takes the case from design through finish. No routing through a generic queue. The clinician who calls with a question on day two is talking to the same person who milled the bar on day one.

THE DETAIL

How we build it.

Large national-network labs processing implant overdenture cases at volume tend to route work through departments rather than technicians. A case that starts in one room finishes in another, and the clinician calling with a fit question gets a general support line. Dani runs the opposite workflow: one named technician, one direct contact number on every case card, and a return call within 4 business hours. The digital workflow at Dani is built around implant prosthetics specifically, not adapted from a crown-and-bridge primary workflow. Bar designs are reviewed against CBCT angulation data before milling begins. That step catches most fit issues before the patient sits in the chair, which is why the remake rate stays under 2.5% on overdenture cases rather than climbing toward the industry average of 5-8%. For Gilbert clinicians evaluating labs, the comparison that matters most is not brand recognition but accountability. If a bar doesn't seat on delivery day, who is responsible and what happens next? Dani's answer: the named technician calls within the same business day, a corrected case ships within 3 days, and there is no remake fee. That policy is not buried in a service agreement. It is stated on the case card that ships with every overdenture.

GETTING CASES TO US

Logistics, to the bench.

Gilbert practices sending implant-supported overdenture cases to Dani Dental get a straightforward intake path: intraoral scan or PVS impression, implant-level or abutment-level records, and a bite registration. From there, a named technician takes the case from design through finish. No routing through a generic queue. The clinician who calls with a question on day two is talking to the same person who milled the bar on day one. On the prosthetics side, Dani fabricates both bar-retained and locator-retained overdentures depending on the restorative plan. Milled titanium bars are designed in-house using CBCT data when available, giving the technician a full picture of implant angulation before a single cut is made. Acrylic processing follows a heat-cure protocol that reduces internal porosity compared to cold-cure alternatives, which matters for long-term base integrity in a full-arch load environment. Gilbert sits in a high-growth corridor where implant placement volume has expanded sharply over the past several years. That means more overdenture conversions landing on restorative clinicians' schedules. Dani's 5-business-day standard turnaround on bar and locator cases is designed to keep chair schedules moving without asking clinicians to pad appointment blocks for lab delays.

COMMON QUESTIONS

What practices ask

What records does Dani Dental need to start an implant-supported overdenture case?
For a bar-retained case, the preferred intake is an implant-level PVS impression or a verified intraoral scan, a facebow or equivalent vertical dimension record, and CBCT data if available. Locator cases follow the same protocol but do not require CBCT as a hard requirement. Gilbert clinicians can call ahead and the assigned technician will confirm the specific record set for the planned design before the patient's impression appointment.
What is the standard turnaround time for a bar-retained overdenture?
Standard turnaround is 5 business days from receipt of verified records. That covers milled titanium bar, processed acrylic base, and final polish. Cases with complex angulation or multi-unit implant configurations that require additional CBCT review may add 1 business day. The assigned technician confirms the timeline on case acceptance, not after the fact.
Does Dani fabricate locator-retained overdentures as well as bar-retained?
Yes. Both retention systems are in regular production. The choice between bar and locator is determined by the restorative plan and implant positioning, and Dani's technicians can provide a pre-fabrication consult if the clinician wants a second set of eyes on the design decision before committing to an attachment system. That consult takes place over a direct call, not a ticket system.
What happens if the bar does not seat correctly on delivery?
The named technician is contacted directly, the clinical photo or scan is reviewed the same business day, and a corrected bar ships within 3 business days. There is no remake fee for cases where the fit issue originates at the lab. The policy is printed on the case card rather than referenced in fine print, because the point of the policy is clarity, not coverage.
Can Gilbert clinicians submit intraoral scans instead of physical impressions?
Yes. Dani accepts scans from all major intraoral scanner platforms currently in clinical use. Scan files are reviewed on receipt for resolution and implant-analog positioning before the case enters production. If the scan is insufficient for a confident bar design, the technician flags it within 24 hours rather than proceeding and billing for a result that will not seat.
How does pricing work for implant-supported overdentures at Dani Dental?
Pricing is provided as a line-item quote before fabrication starts, broken out by component: bar milling, acrylic processing, and attachment hardware. There is no bundled opaque fee structure. Gilbert practices ordering their first case receive the quote before submitting records so the cost fits into the restorative treatment plan without a billing surprise at case delivery.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician