1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Gilbert E.max Lithium Disilicate Crown

Gilbert practices placing E.max lithium disilicate crowns want predictability: predictable shade match, predictable fit, predictable delivery time. Dani Dental works from IPS e.max CAD blocks pressed and milled in-house, with each crown verified against a calibrated shade tab set before it ships. Whether the case arrives as a digital scan from an iTero or Trios unit or as a PVS impression poured and trimmed in our lab, the same technician handles it start to finish.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Gilbert practices placing E.max lithium disilicate crowns want predictability: predictable shade match, predictable fit, predictable delivery time. Dani Dental works from IPS e.max CAD blocks pressed and milled in-house, with each crown verified against a calibrated shade tab set before it ships. Whether the case arrives as a digital scan from an iTero or Trios unit or as a PVS impression poured and trimmed in our lab, the same technician handles it start to finish.

THE DETAIL

How we build it.

Large national-network labs running Gilbert accounts typically process E.max cases through centralized milling centers where no single technician owns the result. A remake request routes through a ticketing system. Turnaround estimates are averages across thousands of cases, not commitments to your account. Dani Dental operates differently: named-technician accountability means the same person who milled and characterized your crown is available for a direct conversation if the shade reads off on delivery. Regional labs in the East Valley vary widely in their digital intake capability. Some still require analog impression only, adding a day to every case. Dani accepts intraoral scan files natively from all major platforms, including iTero, Trios, Medit, and 3Shape, with no conversion fee and no reimbursement maze for digital case submission. On quality metrics, a remake rate below 2.5 percent is the internal benchmark Dani holds for E.max crown production. For context, industry-published remake rates for dental lab crown work commonly land in the 4-8 percent range depending on case complexity and communication protocol. The gap closes when one technician owns the case from scan review through final glaze, which is how every Dani E.max crown is handled regardless of the account's monthly volume.

GETTING CASES TO US

Logistics, to the bench.

Gilbert practices placing E.max lithium disilicate crowns want predictability: predictable shade match, predictable fit, predictable delivery time. Dani Dental works from IPS e.max CAD blocks pressed and milled in-house, with each crown verified against a calibrated shade tab set before it ships. Whether the case arrives as a digital scan from an iTero or Trios unit or as a PVS impression poured and trimmed in our lab, the same technician handles it start to finish. For anterior cases, monolithic E.max in translucency gradients LT through HT covers the majority of single-unit restorations without a cutback. Posterior crowns benefit from the 360-500 MPa flexural strength profile of lithium disilicate, which holds up in bruxers when the occlusal clearance lands at 1.5 mm or better. If your prep falls short of that, we will flag it before we press rather than remake after delivery. Gilbert's growth corridor along Williams Field Road and Higley Road has added dozens of DSO-affiliated and independent practices since 2018. That volume creates a coordination challenge: multiple chairs, multiple providers, mixed scan systems. Dani handles mixed-format intake, and each case ships with the direct line of the technician who built it. You can reach the person who made the crown, not a general support queue.

COMMON QUESTIONS

What practices ask

What minimum occlusal clearance does Dani Dental require for an E.max crown on a posterior tooth?
We require 1.5 mm of occlusal clearance for a monolithic E.max posterior crown and 2.0 mm for a cutback case with layered ceramic. If your prep scans below that threshold, your technician will contact you directly before pressing rather than proceeding and shipping a crown likely to fracture or require adjustment. Catching the prep gap before production saves a return appointment for your patient and eliminates the remake entirely.
Can Gilbert-area practices submit digital scans instead of physical impressions?
Yes. Dani Dental accepts STL and native scan files from iTero, Trios, Medit, and 3Shape platforms with no conversion fee. Digital cases for Gilbert accounts follow the same 5-business-day standard turnaround from scan confirmation. Physical PVS impressions are still accepted and poured in-house; turnaround adds one day for pour and trim before the production clock starts.
Which E.max translucency options does Dani Dental stock for single-unit crown cases?
We press and mill from IPS e.max CAD blocks in LT (Low Translucency), MO (Medium Opacity), and HT (High Translucency) as standard stock. MT (Medium Translucency) and LT Multi are available on request with a one-day lead for block procurement. For anterior cases requiring a detailed shade gradient, a custom characterization stain is applied by the assigned technician before final glaze.
How does Dani Dental handle shade communication for anterior E.max cases?
Each anterior E.max case is matched against a calibrated Vita Classical and 3D-Master tab set before shipping. If you include a shade photo with your submission, the assigned technician reviews it alongside the tab match. For complex anterior cases involving tetracycline stain or significant natural tooth variation, we recommend a shade consultation call with the technician before pressing. That call typically runs 10-15 minutes and eliminates the most common remake driver on anterior single-unit work.
What is the turnaround time for rush E.max crown cases from Gilbert practices?
Rush cases with confirmed digital scans can ship in 3 business days at a rush fee of $35 per unit. The rush window requires scan confirmation before 10 a.m. on the first production day. Physical impression rush cases run 4 business days to allow for pour and trim. Contact your assigned technician directly to confirm rush availability before submitting, as capacity is limited to 8 rush units per production week.
Does Dani Dental offer a remake warranty on E.max crowns for Gilbert accounts?
Yes. Any E.max crown with a documented seating failure attributable to lab fabrication, including shade mismatch confirmed by shade photo, marginal discrepancy exceeding 50 microns, or fracture under normal occlusal load, is remade at no charge within 30 days of delivery. The technician who made the original crown handles the remake. We track remake causes internally; that data directly informs our sub-2.5 percent remake rate target.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician