1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Gilbert Custom Shade Matching

Gilbert practices run a wide case mix: busy family practices in the San Tan corridor, cosmetic, forward offices near Val Vista, and multi, doctor groups handling everything from single, unit PFMs to full, arch veneers in the same week. Shade matching that holds across that range is not a one, setting dial. It requires a documented workflow, calibrated equipment, and a technician who reads photographs the way a sculptor reads a maquette.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Gilbert practices run a wide case mix: busy family practices in the San Tan corridor, cosmetic, forward offices near Val Vista, and multi, doctor groups handling everything from single, unit PFMs to full, arch veneers in the same week. Shade matching that holds across that range is not a one, setting dial. It requires a documented workflow, calibrated equipment, and a technician who reads photographs the way a sculptor reads a maquette.

THE DETAIL

How we build it.

Large national, network labs route shade decisions through a centralized color room staffed by whichever technician is available that shift. The economies of scale are real, but the tradeoff is equally real: no single person owns the outcome on your case, and when a shade misses, the remake request goes back into the same anonymous queue. Gilbert doctors who have experienced that cycle once tend not to repeat it. Dani Dental assigns a named technician to each account before the first case ships. That technician learns your preferred shade philosophy (high, value natural, bleach, white cosmetic, matched, to, existing restorations), your camera setup, and your operatory lighting conditions. Over 6 to 12 months, the shade accuracy on your cases improves because the person reading your photos is building a calibrated model of your submission style, not starting fresh each time. On the equipment side, our ceramic workflow uses layering porcelains selected for optical behavior in Arizona's high, ambient, light environment. Practices here often seat restorations under strong natural light or bright operatory LEDs. A shade that looks correct under a northern European gray, sky assumption can read too cool or too flat in a Gilbert operatory in June. We test fired samples under both conditions before signing off on any cosmetic case.

GETTING CASES TO US

Logistics, to the bench.

Gilbert practices run a wide case mix: busy family practices in the San Tan corridor, cosmetic, forward offices near Val Vista, and multi, doctor groups handling everything from single, unit PFMs to full, arch veneers in the same week. Shade matching that holds across that range is not a one, setting dial. It requires a documented workflow, calibrated equipment, and a technician who reads photographs the way a sculptor reads a maquette. Dani Dental's shade, matching process starts before the case is assigned. Doctors submit either calibrated intraoral photos against a Vita shade tab or a spectrophotometer export from a Vita Easyshade or similar device. The receiving technician logs the optical data, cross, references adjacent tooth hue and chroma, and builds a shade map before any ceramic is fired. For posterior single units, that map takes roughly 20 minutes. For anterior cosmetic cases where translucency layering, incisal haze, and gingival gradients all matter, the technician blocks protected bench time and treats the shade build as its own production phase. Gilbert doctors get a direct technician line, not a case, manager relay. If the shade photo reads ambiguous under mixed operatory lighting, the technician calls the same day rather than guessing and shipping. That 24, hour catch window has saved more remakes than any single equipment upgrade we have made.

COMMON QUESTIONS

What practices ask

What photo format does Dani Dental need for an accurate shade submission from a Gilbert practice?
A calibrated JPEG or RAW image with a Vita shade tab held at the mesial contact of the adjacent natural tooth, shot under consistent operatory lighting with flash. We also accept Vita Easyshade 5 or Rayplicker spectrophotometer exports directly. If your setup differs, call us before the first case and we will build a submission protocol specific to your camera and lighting conditions.
How does named, technician assignment work for shade, sensitive cosmetic cases?
When your Gilbert practice opens an account with Dani Dental, we assign a primary bench technician to your cases. You receive that person's direct phone number and email. For cosmetic anterior cases involving shade matching, your assigned technician reviews the submission personally, contacts you within 24 hours if the data is ambiguous, and signs off on fired samples before the restoration ships.
Can Dani Dental match an existing restoration that was made by another lab years ago?
Yes, and this is one of the more common requests from Gilbert practices handling long, term cosmetic patients. Send us the existing crown or veneer for direct shade analysis if the patient can spare it, or submit macro photos against a full Vita Classic tab set. Our technician will document the hue, chroma, value, and translucency zone breakdown before building the new restoration.
What is your remake policy if the shade does not match at seat?
We remake the case at no charge if the submitted shade data was complete and the mismatch is attributable to our production. The technician who made the original case handles the remake personally to close the feedback loop. Our trailing 12, month remake rate across all shade, matched cases is under 2.5%, which we track and report quarterly.
Do you offer shade consultations for full, arch veneer cases before the case goes into production?
Yes. For full, arch cosmetic cases, we recommend a pre, production shade consult before any provisional is finalized. Submit your pre, op photos, shade goals, and any mock, up images. Your assigned technician returns a written shade prescription, including incisal translucency guidance, within 48 hours. This step is included in the case fee, not billed separately.
How does Arizona's high, ambient light affect shade selection for Gilbert patients?
Strong natural light and high, output operatory LEDs common in Gilbert practices can make restorations read cooler and higher, value than they appear under softer northern light. Dani Dental fires test samples and evaluates them under both ambient light conditions before signing off on anterior cosmetic cases. We also flag this risk in writing on any case where the submitted shade sits at the high, value end of the Vita range.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician