1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Chandler E.max Lithium Disilicate Crown

Chandler practices run busy single-visit and two-visit prep workflows , and e.max lithium disilicate is the ceramic those workflows depend on most. Dani Dental mills and characterizes every e.max crown from IPS e.max CAD blocks sourced directly through Ivoclar's authorized distribution chain. Each unit goes through individual shade verification under calibrated D65 lighting before it ships, so the crown your patient seats looks like the photo you sent, not a lab's best guess.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Chandler practices run busy single-visit and two-visit prep workflows , and e.max lithium disilicate is the ceramic those workflows depend on most. Dani Dental mills and characterizes every e.max crown from IPS e.max CAD blocks sourced directly through Ivoclar's authorized distribution chain. Each unit goes through individual shade verification under calibrated D65 lighting before it ships, so the crown your patient seats looks like the photo you sent, not a lab's best guess.

THE DETAIL

How we build it.

Most national-network labs processing Arizona e.max volume route Chandler cases through a centralized milling hub in another state. That model works for commodity output. It does not work when a crown comes back with a contact that needs adjustment and the technician who milled it is three time zones away and unreachable by direct line. At Dani, every e.max case is assigned a named technician. That technician's direct contact is on the packing slip. If you have a question about the occlusal anatomy or the margin feather, you call the person who built it, not a general support queue. Local regional labs in the East Valley often carry strong ceramics capability but run lean on digital intake infrastructure. Dani operates a full digital workflow: scan-to-mill from STL in the same day the file is received, with no manual re-drawing step unless the margin requires it. That cuts one full day out of the production timeline compared to labs that still re-draw digital margins on a touchscreen before milling. The heritage behind Dani Dental matters here in a specific, practical way. Three generations of bench technicians working e.max since the material's commercial introduction in the mid-2000s means the team is not learning characterization on your cases. Ivoclar's ceramic staining protocols, margin seal finishing, and crystallization cycle timing are muscle memory for this team, not a reference chart on the wall.

GETTING CASES TO US

Logistics, to the bench.

Chandler practices run busy single-visit and two-visit prep workflows , and e.max lithium disilicate is the ceramic those workflows depend on most. Dani Dental mills and characterizes every e.max crown from IPS e.max CAD blocks sourced directly through Ivoclar's authorized distribution chain. Each unit goes through individual shade verification under calibrated D65 lighting before it ships, so the crown your patient seats looks like the photo you sent, not a lab's best guess. For digital practices in Chandler, we accept STL files from any major intraoral scanner: iTero, 3Shape TRIOS, Medit, and Carestream. Analog impressions are fine too , our in-house model department pours, scans, and quality-checks every analog case before milling begins. Either path lands in the same milling queue, and you get a case-status update within 4 business hours of receipt, not the next morning. E.max crowns at Dani are priced per unit with a single line item. No material surcharge added at invoicing. No shade-complexity upcharge unless you are ordering a full-custom layered case (those are quoted at intake, not at ship). Chandler accounts with consistent monthly volume qualify for our preferred pricing tier after 90 days , ask your account rep for the threshold number.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for e.max crown cases from Chandler practices?
We accept STL files from iTero, 3Shape TRIOS, Medit, and Carestream scanners. Files can be submitted via our secure upload portal or through your scanner's native send workflow if it supports direct lab transmission. Analog PVS and polyether impressions are also accepted. Our model department pours, scans, and quality-checks analog cases before they enter the milling queue, adding roughly 4 hours to total production time compared to a clean digital submission.
What is the standard turnaround for a single-unit e.max crown from a Chandler practice?
Standard queue is 5 business days from scan or impression receipt to delivery. Rush queue delivers in 3 business days for cases flagged at submission. Same-day milling is available for Chandler practices with a confirmed 2:00 PM or earlier file submission; call your account technician directly to confirm slot availability before relying on same-day for a seated appointment.
How does Dani Dental handle e.max shade matching for complex cases?
Every crown is verified under D65-calibrated lighting before it ships. For complex shade cases, we request a shade photo taken under natural or D65 light alongside the standard shade tab selection. If the photo and tab conflict, your assigned technician calls you before milling. Custom layered e.max is quoted at intake and takes an additional 2 business days over the standard monolithic timeline.
What e.max block source does Dani Dental use?
We mill from IPS e.max CAD blocks sourced through Ivoclar's authorized U.S. distribution chain. We do not substitute third-party lithium disilicate blanks marketed as compatible. Block lot numbers are logged per case and available on request. This matters for practices that track material provenance for their own quality records or for insurance documentation purposes.
Does Dani Dental offer a remake policy for e.max crowns?
Yes. If an e.max crown returns with a verified lab-side defect (margin discrepancy, shade outside the agreed range, fractured in the box), we remake at no charge and prioritize it on the 3-business-day rush queue. Cases where the remake request stems from a prep change, impression error, or patient preference shift after seat are quoted as new cases. Your account technician reviews each request individually and responds within 4 business hours.
Can a Chandler practice mix digital and analog submissions in the same monthly account?
Yes, and most of our Chandler accounts do exactly that. Some chairs run intraoral scanners; others still prefer PVS for posterior full-coverage cases. Both submission types live under the same account number, receive the same turnaround SLA, and invoice on the same monthly statement. There is no separate pricing tier or account setup required for mixed-submission practices.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician