1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Boulder City Occlusal Splint / Night Guard

Boulder City practices serving the Lake Mead corridor see a specific bruxism and TMD profile tied to a patient population that skews older, active outdoors, and under chronic environmental stress. That translates to higher-than-average wear patterns and more frequent appliance replacement cycles. Dani Dental fabricates occlusal splints in hard acrylic, dual-laminate, and soft thermoplastic materials depending on the clinical indication you send with the case. We also produce anterior deprogrammers, flat-plane stabilization splints, and NTI-style devices on request.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Boulder City practices serving the Lake Mead corridor see a specific bruxism and TMD profile tied to a patient population that skews older, active outdoors, and under chronic environmental stress. That translates to higher-than-average wear patterns and more frequent appliance replacement cycles. Dani Dental fabricates occlusal splints in hard acrylic, dual-laminate, and soft thermoplastic materials depending on the clinical indication you send with the case. We also produce anterior deprogrammers, flat-plane stabilization splints, and NTI-style devices on request.

THE DETAIL

How we build it.

Most regional dental labs serving the Boulder City and Henderson corridor route occlusal appliance cases through a production generalist pool, meaning the technician who designs the articulation on Monday may not be the person who finishes the appliance on Thursday. Dani Dental assigns a named bench technician to each account at setup. That technician owns your cases start to finish, which compresses the internal handoff errors that cause the subtle occlusal discrepancies that send appliances back. National-network labs in this category compete primarily on volume pricing and portal convenience. The tradeoff is a communication layer that routes every inquiry through a client-services representative who then relays to production, adding 24 to 48 hours to any resolution cycle. Our model routes you directly to the bench, with a 4-business-hour response commitment stated in writing on every account agreement. For a Boulder City practice doing 8 to 15 appliance cases per month, the avoided remake cycle alone typically offsets the per-unit difference within 90 days. On the materials side, we source hard acrylic blanks and dual-laminate stock from the same certified suppliers used in hospital-affiliated prosthodontic programs, not from secondary-tier distributors. The material traceability documentation ships with each case on request, which matters for practices that carry ISO-adjacent quality documentation.

GETTING CASES TO US

Logistics, to the bench.

Boulder City practices serving the Lake Mead corridor see a specific bruxism and TMD profile tied to a patient population that skews older, active outdoors, and under chronic environmental stress. That translates to higher-than-average wear patterns and more frequent appliance replacement cycles. Dani Dental fabricates occlusal splints in hard acrylic, dual-laminate, and soft thermoplastic materials depending on the clinical indication you send with the case. We also produce anterior deprogrammers, flat-plane stabilization splints, and NTI-style devices on request. Digital workflows are fully supported. Send an intraoral scan file directly from your iTero, 3Shape Trios, or Medit system and we route it to fabrication without a stone model. PVS impressions are equally welcome; our model room pours, articulates, and passes to the bench the same day the case arrives. For Boulder City accounts, standard ground shipping from our Arizona lab keeps most cases on a 5 to 7 business day window from scan receipt to your door. Every appliance ships with a fit-check protocol card and the direct extension of the technician who made it. If a chair-side adjustment surfaces a fit question, you call that technician, not a general queue. We also offer a complimentary remake within 30 days if the delivered appliance does not seat within the stated tolerance parameters.

COMMON QUESTIONS

What practices ask

What scan formats does Dani Dental accept for occlusal splint cases from Boulder City?
We accept STL and PLY exports from all major intraoral scanner platforms including iTero, 3Shape Trios, Medit, and Cerec Primescan. Upload directly through our case portal and the file routes to fabrication without a stone model. If your scanner exports a proprietary format, contact your assigned technician before submitting and we will confirm compatibility within 4 business hours.
How long does a standard night guard case take from Boulder City to delivery?
Standard turnaround is 5 to 7 business days from the date we receive either a confirmed digital scan or a physical PVS impression. Rush 3-business-day service is available for hard acrylic flat-plane splints at an additional fee. Delivery to Boulder City via ground shipping from our Arizona lab is included in the standard turnaround window.
Which occlusal appliance designs does Dani Dental fabricate?
We fabricate hard acrylic flat-plane stabilization splints, dual-laminate night guards, soft thermoplastic guards, anterior deprogrammers, and NTI-style anterior discluders. Bite registration requirements and material recommendations vary by design. Your assigned technician can walk through the clinical indication and prescription requirements before you submit the case.
What is your remake or warranty policy for occlusal splints?
We offer a complimentary remake within 30 days of delivery if the appliance does not seat within the stated tolerance parameters and the original impression or scan is found to be within spec. Cases involving a compromised impression or out-of-range scan data are evaluated case by case. Contact your assigned technician directly; resolution decisions are made at the bench level, not by a client-services queue.
Does Dani Dental provide material traceability documentation for occlusal appliances?
Yes. For practices that maintain ISO-adjacent quality records or carry a documentation requirement from a hospital affiliation or group practice agreement, we provide a material traceability sheet listing the acrylic or laminate batch, supplier, and lot number. Request this on your prescription form or through the case portal and it ships with the appliance.
How do Boulder City accounts communicate with the fabricating technician?
Every Boulder City account is assigned a named bench technician at setup. Their direct extension is printed on the packing slip of every case shipment and stored in your account profile on the portal. Response commitment is 4 business hours for calls or messages left before 3 p.m. Arizona time. You are not routed through a general client-services line.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician