1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Boulder City Intraoral Scan Acceptance

Boulder City practices sit roughly 25 miles southeast of the Las Vegas metro, which means courier windows are workable but not instant. Submitting an intraoral scan through Dani Dental's secure upload portal eliminates that geography entirely. The file lands in Phoenix within seconds, enters the design queue, and your technician contacts you directly if any margin detail needs clarification before milling begins. No polyvinyl siloxane impression to ship, no risk of a torn margin arriving distorted after a summer drive through Nevada heat.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Boulder City practices sit roughly 25 miles southeast of the Las Vegas metro, which means courier windows are workable but not instant. Submitting an intraoral scan through Dani Dental's secure upload portal eliminates that geography entirely. The file lands in Phoenix within seconds, enters the design queue, and your technician contacts you directly if any margin detail needs clarification before milling begins. No polyvinyl siloxane impression to ship, no risk of a torn margin arriving distorted after a summer drive through Nevada heat.

THE DETAIL

How we build it.

Large national-network laboratories accept digital scans too, but file receipt often routes through a triage queue before a human reviews it. At Dani Dental, every scan-originated case is assigned to a named technician whose direct line ships with the finished restoration. If a margin reads ambiguous at the .005 mm level, your technician calls Boulder City before the case goes to mill, not after the crown comes back requiring adjustment. That one step alone accounts for a meaningful fraction of the difference between a sub-2.5% and a near-5% remake rate across comparable case volumes. Regional lab operations in the Nevada and Arizona corridor frequently accept only one or two scanner platforms, then charge a conversion fee for anything outside their preferred format. Dani accepts six platforms without a conversion surcharge, which matters when a Boulder City practice runs an iTero for orthodontic records and a Medit for restorative work on the same patient. Mixing scanner outputs into a single case is handled in-house during design, not outsourced to a file-conversion vendor. On the quality side: every zirconia and lithium disilicate restoration milled from a scan file is inspected against the original STL before boxing. Shade is verified under standardized light, margins are checked under magnification, and the occlusal contacts are reviewed against the opposing arch data from the scan. The case either passes all three checkpoints or it doesn't ship. Boulder City practices working on a Tuesday-to-Friday seat window get a realistic turnaround estimate at case submission, not a revised estimate the day before delivery.

GETTING CASES TO US

Logistics, to the bench.

Boulder City practices sit roughly 25 miles southeast of the Las Vegas metro, which means courier windows are workable but not instant. Submitting an intraoral scan through Dani Dental's secure upload portal eliminates that geography entirely. The file lands in Phoenix within seconds, enters the design queue, and your technician contacts you directly if any margin detail needs clarification before milling begins. No polyvinyl siloxane impression to ship, no risk of a torn margin arriving distorted after a summer drive through Nevada heat. The workflow accepts open-format STL files and native files from the six scanner platforms listed above. Crowns, bridges up to 4 units, implant-supported single units, and inlay or onlay preps all translate cleanly from scan to CAD. For full-arch implant cases in Boulder City, the scan alone is typically not sufficient; Dani's technicians will walk you through the supplemental records checklist (CBCT, bite registration protocol) so the case doesn't stall mid-design. Practices that switch from analog impression submissions to digital scan submission typically recover 15 to 20 minutes of chair time per crown prep, because there is no impression tray selection, no material wait, and no re-impression if a margin pulls. That time compounds across a busy restorative schedule. Dani Dental's Phoenix laboratory is equipped to mill, press, or layer the restoration once the design is approved, so the digital intake is matched by a physical output that arrives boxed and shade-verified, ready to seat.

COMMON QUESTIONS

What practices ask

Which scanner file formats does Dani Dental accept from Boulder City practices?
Dani accepts open STL as well as native files from iTero (.niri), 3Shape TRIOS, Medit, Carestream, Planmeca, and Cerec. No format conversion fee applies to any of those six platforms. If you are running a scanner not on that list, contact the lab before your first submission and the team will confirm compatibility within one business day.
How does a Boulder City practice submit a scan file to Dani Dental?
Upload directly through Dani Dental's secure case portal. Files submitted before noon Arizona time enter the design queue the same business day. The portal accepts files up to 500 MB per case. For very large full-arch or multi-quadrant submissions, the team can arrange an SFTP transfer or walk you through the Medit Link or iTero Element share workflow, whichever your scanner uses.
What is the typical turnaround from scan submission to finished restoration?
Single-unit crowns and inlays submitted with clean margins and a full opposing arch scan typically complete design review within 48 hours and ship within 5 to 7 business days depending on material. Lithium disilicate pressed cases run slightly longer than milled zirconia. Turnaround estimates are confirmed at case submission, not revised after the case is already in production.
Does Dani Dental accept intraoral scans for implant-supported restorations?
Yes, with a records checklist. Single-unit implant crowns from a scan plus a scan body record are straightforward. Full-arch implant cases require supplemental CBCT data and a verified bite registration protocol before design begins. Dani's technicians send the implant records checklist on first contact for any full-arch case so nothing stalls at the design stage.
What happens if the scan margin is unclear when the file arrives at the lab?
The assigned technician contacts the submitting practice directly, by phone, before the case goes to the mill. The technician identifies the specific tooth and the exact margin area in question. If a retake scan or supplemental photograph resolves it, the case continues without a delay charge. The call happens within the same business day the file was reviewed, not the morning the restoration was due to ship.
How does submitting scans rather than PVS impressions affect remake rates?
Across Dani Dental's current production data, scan-originated cases track below a 2.5% remake rate. The primary driver is eliminated distortion: a PVS impression can shift during pour, trim, or the drive from a Boulder City practice to Phoenix in summer heat. A scan file arrives exactly as captured. Margin detail is fixed at the time of scanning, and any ambiguity is caught at design review rather than after the restoration is finished.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician