1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Avondale E.max Lithium Disilicate Crown

E.max lithium disilicate remains the benchmark for anterior and premolar single-unit restorations where translucency and flexural strength need to coexist. At roughly 400 MPa, IPS e.max CAD and IPS e.max Press give Dani technicians two fabrication paths depending on case complexity. For Avondale practices managing high cosmetic demand from the West Valley patient base, that choice matters: pressed e.max delivers layered characterization ideal for high-visibility anterior cases, while milled e.max CAD integrates cleanly into a same-day digital workflow if your practice runs an in-office mill...

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

E.max lithium disilicate remains the benchmark for anterior and premolar single-unit restorations where translucency and flexural strength need to coexist. At roughly 400 MPa, IPS e.max CAD and IPS e.max Press give Dani technicians two fabrication paths depending on case complexity. For Avondale practices managing high cosmetic demand from the West Valley patient base, that choice matters: pressed e.max delivers layered characterization ideal for high-visibility anterior cases, while milled e.max CAD integrates cleanly into a same-day digital workflow if your practice runs an in-office mill...

THE DETAIL

How we build it.

Large national lab networks built for volume production handle e.max crowns as a commodity item: scan in, mill out, ship. That model prices aggressively and delivers consistently average. For Avondale practices building a cosmetic reputation in the West Valley market, consistently average is a liability. Dani Dental routes every e.max case to a named technician who takes primary accountability from design through glazing. There is no hand-off point where your shade notes get lost in a queue. Regional labs operating at smaller scale sometimes offer personalized service but lack the digital infrastructure to accept and process modern intraoral scan files reliably. Dani operates both: full digital intake for scan-to-mill and scan-to-press workflows, alongside traditional analog paths for practices still running PVS impressions. That dual capability means you are not forced to change your clinical workflow to work with us. The system adapts to your office, not the reverse. The communication layer is where most labs lose accounts. Per our own intake data, price and quality disputes are almost always downstream of a communication failure: a shade call that never got made, a margin question that sat unanswered for two days. Dani's model is structured around a response window of 4 business hours for active cases, with the technician's direct line on every shipping invoice. That is not a call-center routing promise. It is a named person with a direct number.

GETTING CASES TO US

Logistics, to the bench.

E.max lithium disilicate remains the benchmark for anterior and premolar single-unit restorations where translucency and flexural strength need to coexist. At roughly 400 MPa, IPS e.max CAD and IPS e.max Press give Dani technicians two fabrication paths depending on case complexity. For Avondale practices managing high cosmetic demand from the West Valley patient base, that choice matters: pressed e.max delivers layered characterization ideal for high-visibility anterior cases, while milled e.max CAD integrates cleanly into a same-day digital workflow if your practice runs an in-office mill or sends scans directly. Dani Dental's Avondale-area workflow starts with scan acceptance. We receive STL files from all major intraoral scanner formats, no proprietary portal required. Cases needing shade matching beyond the standard VITA classical range get routed to a named senior technician with a direct line, not a general inbox. Every case ships with documentation: the technician's contact, the shade formula used, and a photo of the restoration pre-pack. If a case needs to go back, that same technician owns the remake, no re-explaining the original intent. For posterior single units where monolithic zirconia is often the reflex choice, e.max still earns consideration up to first molar in lower-load bite profiles. The esthetic payoff in the premolar zone is significant, and Dani's technicians can walk you through the occlusal load conversation case by case. Blanket protocols miss nuance; a five-minute call before the case sets up a better result than a remake after delivery.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for e.max crown cases from Avondale practices?
We accept STL files from all major intraoral scanner platforms including iTero, 3Shape TRIOS, Medit, and Carestream. No proprietary portal or dedicated software license is required on your end. Cases can also be submitted via PVS impression if your practice is not yet fully digital. Scan files should be sent to your assigned case coordinator along with shade prescription and any prep notes.
What is the standard turnaround time for an e.max lithium disilicate crown?
Standard turnaround for e.max crown cases is 5 business days from receipt of a scannable impression or accepted STL file. Rush cases with a 3-business-day window are available on request, subject to current case volume. Your technician will confirm availability before you commit the case to rush scheduling. Turnaround clock starts on the business day following confirmed receipt.
When should I choose pressed e.max over milled e.max CAD for an anterior case?
Pressed e.max allows for incremental layering and deeper characterization, making it the stronger choice for high-visibility anteriors where translucency gradients and incisal effects matter. Milled e.max CAD integrates faster into digital workflows and is well-suited for premolars and cases where turnaround speed is prioritized. Dani technicians can advise on the better path for a specific case during a pre-case consultation call, typically 5 minutes.
Can e.max be used for posterior crowns, or is zirconia always the right call?
E.max at approximately 400 MPa flexural strength is a valid choice for premolars and first molars in patients with moderate occlusal load profiles. It is generally not recommended for second molars or bruxers without protective occlusion management. The esthetic advantage in the premolar zone is significant enough that a blanket zirconia protocol sacrifices visible esthetics without meaningful clinical gain. Dani technicians will flag high-load risk cases before fabrication.
What happens if an e.max crown needs to be remade after delivery?
The same named technician who fabricated the original case owns the remake. You do not re-explain the shade prescription, the margin concern, or the occlusal issue to a new person. The technician's direct line is on every shipping invoice. Our trailing 12-month remake rate across all e.max cases is under 2.5%, and when a remake is needed, it is treated as a case quality issue, not a billing event.
How does shade matching work for complex anterior e.max cases?
Cases requiring shade characterization beyond the standard VITA classical range are routed to a senior technician for a pre-fabrication shade consultation. You can submit photos using a standard DSLR or a smartphone with a gray card reference. The technician documents the exact formula used, and that documentation ships with the case. If you have an in-office spectrophotometer, we accept digital shade files from Vita Easyshade and similar devices.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician