1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Albuquerque 3D-Printed Restoration

Albuquerque practices that send intraoral scans or CBCT files directly to Dani Dental get a fully digital workflow from intake to delivery. No stone models required for most crown and bridge cases. The lab accepts STL, PLY, and OBJ files from any major scanner platform, mills or prints in monolithic zirconia, printed PMMA provisional, or high-strength resin depending on clinical indication, and ships back to New Mexico in five business days on standard orders. Rush cases land in three.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Albuquerque practices that send intraoral scans or CBCT files directly to Dani Dental get a fully digital workflow from intake to delivery. No stone models required for most crown and bridge cases. The lab accepts STL, PLY, and OBJ files from any major scanner platform, mills or prints in monolithic zirconia, printed PMMA provisional, or high-strength resin depending on clinical indication, and ships back to New Mexico in five business days on standard orders. Rush cases land in three.

THE DETAIL

How we build it.

Most regional labs serving the Albuquerque market still run a hybrid analog-digital workflow: they accept digital files but translate them back to poured models before milling. Dani Dental is fully chairside-scan-to-printed-unit with no analog conversion step in the standard crown and bridge protocol. That cuts one to two days from turnaround and removes the dimensional error introduced when a digital impression is re-poured. National-network labs offer 3D-printed restorations at volume pricing, but the tradeoff is anonymized case handling. A case number is not the same as a technician. Dani runs named-technician accountability on every printed case: the person who designed the crown is the person whose direct line is on the case slip. For Albuquerque dentists managing complex multi-unit implant cases, that accountability difference shows up at try-in, not in a brochure. On pricing, Dani does not route Albuquerque accounts through a procurement layer or a sales rep commission structure. The range for printed monolithic zirconia crowns is quoted directly, updated when material costs shift, and not padded to absorb broker margin. Practices that have moved from national-catalog labs to Dani have reported chair-time savings of one to two appointments per arch case, measured by fewer remakes and fit adjustments at delivery.

GETTING CASES TO US

Logistics, to the bench.

Albuquerque practices that send intraoral scans or CBCT files directly to Dani Dental get a fully digital workflow from intake to delivery. No stone models required for most crown and bridge cases. The lab accepts STL, PLY, and OBJ files from any major scanner platform, mills or prints in monolithic zirconia, printed PMMA provisional, or high-strength resin depending on clinical indication, and ships back to New Mexico in five business days on standard orders. Rush cases land in three. The range spans single units to full-arch printed hybrids. Implant-supported printed provisionals, printed surgical guides coordinated alongside the restorative case, and monolithic zirconia crowns with custom shade mapping are all in scope. Albuquerque dentists running high-volume implant days have used the printed provisional workflow to clear a full-arch case and seat within the same week. That kind of speed matters when a patient drove two hours from Taos or Farmington. Every printed unit that leaves the Arizona bench is documented with the technician's name, the material batch, and the occlusal parameters used. That documentation ships with the case, not buried in a portal. If a margin needs adjustment, the technician who built it is reachable the same afternoon.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept from Albuquerque practices?
The lab accepts STL, PLY, and OBJ files from any major intraoral scanner. That covers iTero, 3Shape TRIOS, Medit, and Carestream platforms without conversion on your end. CBCT DICOM files are accepted for surgical guide coordination. If your scanner exports a proprietary format, contact the lab before the first case and the team will confirm compatibility within four hours.
How long does a standard 3D-printed crown take to reach an Albuquerque office?
Standard cases from scan acceptance to delivery at an Albuquerque address run five business days. Rush cases run three. Turnaround starts the business day after the digital file passes QC intake, not the day you upload. The lab sends a confirmation when the case enters production so the front desk can schedule the seat appointment without guessing.
Which materials are available for printed restorations?
Monolithic zirconia is the primary crown and bridge material, available in multi-layer gradient blanks for anterior cases and high-strength homogeneous blanks for posterior and implant-supported work. Printed PMMA provisionals are available for long-term temporization. High-strength resin is offered for printed surgical guides. Material selection is confirmed case-by-case based on the clinical indication you specify on the case slip.
Can Dani Dental handle full-arch printed cases for Albuquerque implant practices?
Yes. Full-arch printed hybrid cases, implant-supported printed provisionals, and coordinated surgical guide plus restorative workflows are all in scope. The technician assigned to a full-arch case remains the same contact from design approval through final delivery. Albuquerque practices running same-day or next-day implant protocols use the provisional workflow to seat within the first week of implant placement.
What happens if a printed unit does not seat correctly?
The named technician on the case slip is reachable the same afternoon by direct line, not through a ticket queue. If the issue is a fit discrepancy traceable to the lab's design or print parameters, the remake is expedited at no charge. Dani's 12-month rolling remake rate across printed units is under 2.5 percent, tracked per technician and reviewed quarterly.
Does Dani Dental require a stone model for 3D-printed cases?
No stone model is required for standard crown and bridge cases submitted as clean intraoral scan files. The lab runs a fully digital protocol from file intake through printed unit output for those cases. Some complex implant cases involving analog components may require a physical model; the technician will flag that during QC intake, typically within four business hours of file submission.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician