1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

PROCEDURE

Ceramics

Anterior shade matching is where labs lose cases and clinicians lose trust. Dani Dental's ceramics workflow pairs IPS e.max and Vita Suprinity stacking with direct technician, to, doctor communication on every case, so shade approvals happen in one round, not three.

  • Margins verified against your prescription
  • Pre-paid two-way shipping
  • Talk to the technician who built it
  • Full digital workflow

Every ceramic case at Dani Dental opens with a pre, fabrication shade consult. The technician assigned to the case reviews the digital scan or impression, the shade tab photo under natural light, and any clinical notes before a single ingot is pressed. If the submitted photos are insufficient to commit to a shade, the technician calls the prescribing doctor directly, same day. We do not guess and we do not batch the conversation into a remake after delivery. For pressed ceramic units, Dani Dental works primarily with the Ivoclar IPS e.max CAD and IPS e.max Press systems, selected because the lithium disilicate matrix allows predictable light transmission in the 1.0, 1.5 mm range without opacity spikes. Vita Suprinity zirconia, reinforced lithium silicate is the secondary material for posterior units where fracture resistance outweighs translucency requirements. Material selection is documented on the case card, not left to production, floor discretion. Layered and cutback anterior cases go to a single named technician from ingot to glaze. No handoff between a pressing tech and a stacking tech mid, case. This matters because layering decisions, including incisal haze, characterization placement, and glaze texture, require reading the case as a whole. Splitting those steps between two people who do not communicate in real time produces the kind of average shade result that looks fine in isolation and wrong in the mouth next to the natural dentition. For full, arch ceramic cases, particularly anterior veneers in sets of eight to twelve, Dani Dental runs a bisque, bake try, in protocol as standard, not as an upsell. The bisque return is reviewed by the same technician who stacked the case. Adjustments are documented in writing on the case card so the final glaze stage has an explicit reference point. Prosthodontists working complex smile design cases can request a pre, bisque digital mockup reviewed against the pre, op CBCT or intraoral scan before pressing begins. Finished ceramic units ship with the case technician's direct line printed on the delivery slip. Not a general lab number. Not a support queue. The technician who built the case. If there is a shade question in the chair, the doctor has 30 seconds to reach the right person. That is not a marketing claim; it is the operational standard Dani Dental has run since the Tempe practice expansion in 2019.

HOW IT IS BUILT

From prescription to seated case.

01

Prescription in

Send a scan file or a model with your RX. A technician reads your intent before any design begins.

02

Design & verify

We design to your margin and occlusion, then verify the fit against your prescription before it ships.

03

Build at the bench

Milled, pressed, or hand-layered as the case calls for, finished by a named technician.

04

Back to your chair

Pre-paid shipping returns the case ready to seat, with the technician reachable if anything needs an adjustment.

This is our standard pipeline. The exact steps for Ceramics are being detailed and will appear here.

MATERIALS

What goes in the mouth.

The material options for Ceramics, from zirconia and lithium disilicate to hand-layered porcelain, are being written up. Ask for a Doctor Kit and a technician will talk through the right choice for your case.

CASE WORK

Judge the work on its result.

Before-and-after case work for Ceramics is being photographed at the studio. The best proof is a case of your own. Send one and see the finish on your chair.

Send a case

COMMON QUESTIONS

What dentists ask about Ceramics

Which ceramic materials does Dani Dental use for anterior restorations?
For anterior single units and veneers, Dani Dental works primarily with IPS e.max Press and IPS e.max CAD from Ivoclar. Both are lithium disilicate systems that allow shade depth and incisal translucency in the 1.0, 1.5 mm range. Vita Suprinity is used where higher fracture resistance is the clinical priority. Material selection is confirmed on the case card before fabrication begins, not decided on the floor.
What is Dani Dental's turnaround time for ceramic crowns and veneers?
Standard turnaround on pressed and layered ceramic units is 5 business days from receipt of a usable scan or impression. Full, arch veneer cases and bisque try, in protocols add 2, 3 business days to account for the return step. Rush cases under 3 business days are available for single units when production scheduling allows. Call the lab directly to confirm rush availability before committing to a patient appointment.
How does Dani Dental handle anterior shade matching remotely?
The assigned technician reviews shade tab photos, the digital scan, and clinical notes before pressing begins. If the submitted photos cannot support a confident shade commitment, the technician calls the prescribing doctor the same day. We do not proceed on ambiguous shade data and batch the correction into a remake after delivery. That sequence costs the doctor a chair appointment. We prefer the 5, minute call.
Does Dani Dental offer bisque try, in for veneer cases?
Yes. Bisque, bake try, in is standard protocol on anterior veneer sets, not an upsell. The same technician who stacked the case reviews the bisque return, documents the adjustments in writing, and uses that reference for the final glaze stage. Prosthodontists working complex smile design cases can also request a pre, bisque digital mockup reviewed against pre, op records before any pressing begins.
What is Dani Dental's remake rate on ceramic restorations?
Dani Dental's ceramic remake rate has held under 2.5 percent on a 12, month rolling basis through 2024, 2025, measured against the full ceramic case log for that period. When a remake is required due to a lab, side error in shade, fit, or contour, Dani Dental absorbs the fabrication cost and prioritizes turnaround. The 5, business, day standard applies to remake cases as well.
Can a prosthodontist collaborate on case planning before ceramics fabrication begins?
Yes. Prosthodontists and general dentists managing complex anterior cases can schedule a pre, fabrication case review with the assigned ceramics technician. The conversation covers shade strategy, incisal characterization, material selection, and whether a digital mockup reviewed against the pre, op scan is warranted before pressing. That call takes under 20 minutes and routinely eliminates the need for a bisque adjustment round.
How do I reach the technician working on my ceramic case after delivery?
Every ceramic case ships with the assigned technician's direct phone number on the delivery slip. Not a general queue. Not a front, desk transfer. If there is a shade question, a fit concern, or a clinical note before the next appointment, the doctor has direct access to the person who built the case. That contact is maintained through the warranty period on the restoration.
Does Dani Dental fabricate ceramic restorations for other laboratories without in, house milling?
Yes. Dani Dental provides ceramic fabrication services for mid, sized laboratories that outsource milling or ceramic stacking. Cases are accepted via digital file transfer or physical model. The same named, technician protocol applies: one technician owns the case from material selection to glaze. Pricing and turnaround for lab, to, lab accounts are discussed directly with the production team, not through a tiered vendor portal.

REQUEST A DOCTOR KIT

Send us a Ceramics case.

Request a Doctor Kit and we will mail RX pads, a shade guide, and pre-paid shipping. Run your first cases through the studio and judge the result on your own chair.

Request a Doctor KitTalk to a technician